-
×
Dynabrade 61420 Raptor Vac Electric Portable Vacuum System
1 × $1,408.00 -
×
Dynabrade 53270 7" (180 mm) Dia. Right-Angle Disc Sander
1 × $1,585.00 -
×
Dynabrade 14000 Dynafile Abrasive Belt Tool
2 × $734.00 -
×
Dynabrade 11254 Contact Arm Ass'y, 4-3/4" Dia. x 1/2" W
1 × $533.42 -
×
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
2 × $2,022.00 -
×
Dynabrade 64404 36" W x 60" L (914 mm W x 1,524 mm L) Metal Capture Downdraft Table, 230 V (AC), Side Exhaust
1 × $28,988.00 -
×
Dynabrade 96101 Dynabrade Air Lube 10W/NR 24 Per Box
2 × $385.42 -
×
Dynabrade 14360 Pneumatic Pipe Belt Finisher
2 × $1,679.00 -
×
Dynabrade 51301 .5 hp Straight-Line Die Grinder
1 × $453.00 -
×
Dynabrade 64350 26" W x 36" L (660 mm W x 914 mm L) Metal Capture Downdraft Station, 230 V (AC)
3 × $18,352.22 -
×
Dynabrade 40610 Electric Dynafile II Abrasive Belt Tool
2 × $420.00 -
×
Dynabrade 53533 Cone or Plug Grinder (Triple Extension)
1 × $1,569.00 -
×
Dynabrade 14010 Dynafile Abrasive Belt Tool Versatility Kit
2 × $915.00 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,245.00 -
×
3M 21762, Stikit Cloth Disc Roll 341D, 60 X-weight, 6 in x NH, Die 600Z, 7000118780
800 × $169.03 -
×
Dynabrade 92585 3-1/2" Dia. x Medium Hook-Face Surface Conditioning DynaBrite Disc, 10/pack
10 × $2.70 -
×
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
200 × $1.61 -
×
3M 05182, Scotch-Brite Cut and Polish Wheel, CP-WL, 5A Fine, 6 in x 1/2 in x 1 in, 7100050403,Box of 4
1 × $94.50 -
×
Norton 66261014897 2" x 1/4" Bear-Tex NEX Rapid Blend AO Medium Grit TR (Type III) Non-Woven Wheel, 60 Each
60 × $4.78
3M 27746, Scotch-Brite High Strength Disc, 8 in x 1/2 in, A MED, 7100045908
$10.27
Factory Stock, 7-10 Day Leadtime
Scotch-Brite High Strength Disc is a general purpose disc made of a durable, tough web and is designed to effectively clean, deburr, denib/defuzz, and achieve satin finishes. The durable, non-woven, open-web construction resists loading and runs cool to keep the abrasives cutting at a consistent rate throughout the life of the disc.
Conformability allows the Scotch-Brite High Strength Disc to work well on irregular surfaces and into tight areas without damaging the base material. This disc may be used individually or stacked on a straight shaft tool or bench motor to condition larger areas, bar grates, louvers, vents, and tracks.
Scotch-Brite is a unique surface conditioning product with abrasives incorporated into non-woven nylon fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material is load resistant and keeps the abrasive minerals cutting at high performance by limiting clogging of the nylon fibers.
Related products
