-
×
Dynabrade 52833 1/4" Drill, .4 HP, Rear Exhaust, 2,400 RPM
1 × $609.00 -
×
Dynabrade 64490 33" (84 cm) W x 60" (152 cm) L Downdraft Sanding Table, 220 V (AC)
1 × $4,192.35 -
×
Dynabrade 13253 Housing for Model 13202
1 × $140.64 -
×
Dynabrade 95745 1/4" NPT Speed Regulator
1 × $85.81 -
×
Dynabrade 52982 Sleeve, Vacuum Cuff
1 × $52.09
-
×
Dynabrade 79494 4-1/4" Dia. x 2" W x 5/8"-11 Center Thread, Medium, DynaBrite Surface Conditioned Flap Roll
1 × $74.84 -
×
Dynabrade 79039 1" W x 18" L 60 Grit A/Z DynaCut Belt, 50/pack
50 × $2.97 -
×
Dynabrade 31986 Hose Cuff Clip
1 × $39.15
-
×
Dynabrade 52630 4" (102 mm) Dia. Right Angle Depressed Center Wheel Grinder, 1.3 HP, 13,500 RPM, 3/8"-24 Spindle
1 × $860.00
Dynabrade 92582 3-1/2″ Dia. x 100 Micron A/O Non-Vacuum Hook-Face Scalloped-Edge DynaCut Disc, 50/Box
$0.98
3-1/2″ Dia. x 100 Micron A/O Non-Vacuum Hook-Face Scalloped-Edge DynaCut Disc, 50/Box
- The most common mineral used in a wide range of good, general purpose abrasive products for use primarily on softer materials. It lacks the hardness of some other abrasive minerals but delivers a dependable performance where high pressure/high heat applies
- Backsplash corners.
Abrasive Specifications
Mfr. Part # 92582
| Abrasive Category | Coated Abrasives |
|---|---|
| Abrasive Diameter [inches] | 3-1/2″ |
| Abrasive Mineral Type | AO |
| Abrasive Shape | Discs |
| Diameter [inches] | 3-1/2″ |
| Abrasive Sub Shape | Hook and Loop |
| CE Certified | No |
| EAC Certified | No |
| Height [inches] | 0.0 |
| Length [inches] | 0.0 |
| Weight [pounds] | 0.0 |
| Width [inches] | 0.0 |
| Micron | 100.0 |
| Vacuum Type | Non-Vacuum |
| Abrasive Backing Material | Film |
| Abrasive Sub Shape 2 | Non-Vacuum |
| Abrasive Sub Shape 3 | Film |
| Abrasive Tier | Better |
| EAN (UPC) Code | 0616026925823 |
| Quantity Each Pack | 10 |
| Abrasive Grit / Grade | 100 |
| Type | Coated |
Related products
Aerospace Tools
Dynabrade 64350 26″ W x 36″ L (660 mm W x 914 mm L) Metal Capture Downdraft Station, 230 V (AC)
$18,352.22