-
×
3M 03999 Scotch-Brite Surface Conditioning Belt, SC-BS, A/O Medium, 2 in x 132 in, 7010309300
5 × $51.26 -
×
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
240 × $8.38 -
×
3M 34572, Cubitron II Net Sheet Roll 80+, 115 mm x 10 m, 7100247508, 6 Rolls/Case
6 × $42.69 -
×
Dynabrade 10690 Filter/Regulator/Lubricator, FRL40, 1/2" NPTAssy.
1 × $370.16 -
×
3M 08857 Scotch-Brite Surface Conditioning Belt, SC-BS, A/O Medium, 1/2 in x 18 in, 7000028454, 48011088570
20 × $6.57 -
×
Dynabrade 95843 Dynabrade Air Lube 10W/NR, 1 Gallon
1 × $104.07 -
×
3M 80775, Cloth Spiral Band 747D, 2 in x 1 in 80 X-weight, 7010309104
100 × $1.17 -
×
3M 05740, Hookit Hand Block, 2-3/4 in x 5 in, 7000045715
10 × $31.28 -
×
3M 05741, Hookit Hand Block, 2-3/4 in x 7-3/4 in, 7000045716
10 × $36.94 -
×
Dynabrade 40610 Electric Dynafile II Abrasive Belt Tool
1 × $400.59 -
×
3M 08360, Urethane Seam Sealer, White, 310 mL Foil Pack, 7000036353, 6 per case
6 × $28.47 -
×
3M 34555, Cubitron II Net Sheet Roll, 240+, 80 mm x 10 m, 7100247339, 6 Rolls/Case
6 × $31.57 -
×
3M 31959, 6450J, M125, 1" X 30", Type C, Pattern 18 Diamond Belts, 7100052712
1 × $0.00 -
×
3M 87449 Silver Depressed Center Grinding Wheel, T27 Quick Change, 9 in x 1/4 in x 5/8-11 Center Hub Thread, 7010409732, 20 per case
20 × $12.65 -
×
Dynabrade 14360 Pneumatic Pipe Belt Finisher
1 × $1,598.86 -
×
3M 80783, Cloth Spiral Band 747D, 2 in x 1 in P120 X-weight, 7010365240
100 × $1.09 -
×
3M 84158, Microfinishing PSA Film Disc 366L, 30 Mic 3MIL, Type D, 5 in x NH, Die 500X, 7010360217, 500 per case
500 × $0.88 -
×
3M 19568, Cloth Belt 777F, 50 YF-weight, 3/4 in x 18 in, Fabri-lok, Full-flex, 7000148229, 200 per case
200 × $2.70
3M 09314, Regalite Floor Surfacing Rolls, 8 in x 50 yd, 752I, P100 Grit, 7010384134
$142.60
Factory Stock, 7-10 Day Leadtime
3M Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite mineral and tough paper backing.
3M Floor Surfacing Rolls are recommended for general drum sanding. They are especially good for removing gummy finishes. This abrasive cuts fast.
