Fast-cutting aluminum oxide abrasive grains are resin-bonded to a durable cotton cloth backing to provide continuous cut and long-life. Our open coat and load-resistant coating make this belt particularly favorable for sanding soft woods. Additionally, the washable backing is suitable for high production environments where the belt may need washing at intervals to remove soft wood resin or pitch buildup.
Aluminum oxide mineral is a popular choice among industrial professionals because of its cut-rate, durability, and long life. It can be used on a wide variety of materials in both woodworking and metalworking, including ferrous alloys, and is the most commonly used industrial abrasive. The abrasive particles are adhered to the cloth backing with resin, creating a strong bond that withstands high heat and pressure.
Abrasive belts come in many different widths and lengths and are used on a variety of different belt sanding tools for many different applications on both wood and metal. At 3M we offer a broad selection of belts to fit most any industrial belt sander. Wider belts are used with wide belt sanders to dimension or finish wood panels, smooth rough cut edges of metal sheets, or add a grain pattern to stainless steel sheets. Medium-width belts fit onto edge sanders for sanding flat, narrow surfaces such as panel edges; and narrow belts are used with portable belt sanders for sanding or blending wood pieces such as cabinet doors.
Belts come with various splices that join the belt ends. A film media splice achieves a secure bond with a joining film that minimizes chatter marks, ensures a smooth running belt, and produces consistent finishing results. A sine wave splice is constructed of interlocking fingers that enable the splice to travel smoothly over contact wheels, reduce hinging, and provide added strength to the joint area. Sine wave splices are typically used for coarser grades and wide belts as well as on belts that are going to be washed.

Dynabrade 51942 Baffle
Dynabrade 50902 Coupling
Dynabrade 51078 Bearing
Dynabrade Nitro Series MNF1K Mini-NitroFile Abrasive Belt Tool Versatility Kit
Dynabrade 11475 Dynabelter Abrasive Belt Tool, Standard Duty
Dynabrade 52672 1 hp Straight-Line 6" (152 mm) Extension Die Grinder, Rear Exhaust, 3,400 RPM, 1/4" Collet
Dynabrade 50795 Sander Accessory Kit
Dynabrade 93393 4" Dia. x 1/2" Center Hole, 120 Grit, A/O,. Arbor-Mount Sanding Star, 10/pack
Dynabrade 46000 .4 hp Right Angle Die Grinder, Rear Exhaust, 12,000 RPM, 1/4" Collet
Dynabrade 54740 3" (76 mm) Dia. Right Angle Type 1 Cut-Off Tool, Steel Housing, .7 HP, 18,000 RPM, 3/8"-24 Spindle
Dynabrade 50348 7" (178 mm) Dia. Right Angle Depressed Center Wheel Grinder, 2 HP, 6,000 RPM, 5/8"-11 Spindle
Dynabrade 53244 7" Dia. Type 27 Vertical Depressed Center Wheel Grinder, 3 HP, 7,200 RPM, 5/8"-11 Spindle
Dynabrade 93343 Carbide Burr, 1/8" Dia., SE-41 D/C Burr, Oval, 7/32" Flute L, 1/8" Shank
Dynabrade 52293 .7 hp 7 Degree Offset Die Grinder, Rear Exhaust, Short Shank, 18,000 RPM, 1/4" Collet
Dynabrade 78570 1" Dia. x 3-48 Female Center Thread, 60 Grit, A/O, 3-Ply, J-DynaCut Eyelet Star, 50/pack
Dynabrade 53460 3" Dia. Right Angle Rotary Buffer, .4 hp, 3,200 RPM, Rear Exhaust, 3/8"-24 Spindle Thread
Dynabrade 14200 Dynangle Abrasive Belt Tool
Dynabrade 50694 Replacement Cloth Dust Collection Bag
Dynabrade 79543 1" W x 11" L Very Fine NWN DynaBrite Belt, 10/pack
Dynabrade 78596 3/8" Dia. x 1-1/2" W x 1/8" Center Hole, 120 Grit, 100/pack
Dynabrade 62483 HEPA Filter/Exhaust
Dynabrade 52378 3" (76 mm) Dia. Straight-Line Type 1 Extension Wheel Grinder, 1 HP, 18,000 RPM, 3/8"-24 Spindle
Dynabrade 52216 .5 hp 7 Degree Offset Die Grinder, Front Exhaust, Long Shank, 15,000 RPM, 1/4" Collet
Dynabrade 92044 2" Dia. x 1" W, 60 Grit, Z/A DynaCut Band, 10/pack
Dynabrade 43506 .4 hp 3" (76 mm) Dia. Extension Die Grinder, Rear Exhaust, 25,000 RPM, 1/4" Collet 
