-
×
Norton 66254489957 Wheel, Vortex-7am, 6" X 1/2" X 1" C2312 Nor VTME7 PH VTC+, 4 Each
4 × $84.19 -
×
ACS Diamond Cloth Belt, CX1250 1" X 42" 200U
6 × $25.65 -
×
Dynabrade 95544 Gear Grease, 2.5oz. Tube
2 × $11.43 -
×
3M 16301, PPS Lid & Liner Kit, Standard (22 fl oz), 125 Micron Full
Diameter Filter, 50 Lids & Liners per kit, 7010029842
1 × $147.10 -
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
200 × $1.39 -
×
ACS 2" Diamond Disc, 60 Mesh, W/ Metal Button
1 × $15.00 -
×
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
500 × $0.58 -
×
ACS Diamond Cloth Belt, CX1250 3/8" X 24" 75U
16 × $5.80
-
×
Dynabrade 14000 Dynafile Abrasive Belt Tool
1 × $734.00 -
×
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091
500 × $0.75 -
×
Standard Abrasives 700743, Cartridge RoII Mandrel, 1/8 in x 3/4 in x 1/8 in x 1 in x 2-3/4 in CM-4, 7010368728
5 × $4.32 -
×
Dynabrade 40610 Electric Dynafile II Abrasive Belt Tool
1 × $420.00 -
×
Insize 7341-5S, PIN GAGE HANDLE (with 1pc handle and 6 pairs of collecting bushes), .228-281", 6928640370618
1 × $39.77 -
×
3M 03016, Glass Cloth Tape 361, White, 3/4 in x 60 yd, 6.4 mil, 7000047441
48 × $89.62 -
×
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
500 × $0.67 -
×
3M™ 17379, Versaflo™ Length Adjusting Breathing Tube BT-30, 7100009685, 1 EA/Case
1 × $80.58 -
×
3M™ 07012, Supplied Air Hose W-9435-100/07012(AAD), 100 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005375, 1 EA/Case
1 × $435.37 -
×
3M 30702, Cloth Belt 577F, 50 YF-weight, 2 in x 132 in, Film-lok, Single-flex, 7010363104, 50 per case
50 × $12.36
3M 09310, Regalite Floor Surfacing Rolls, 8 in x 50 yd, 752I, 40 Grit, 7010384132
$229.48
Factory Stock, 7-10 Day Leadtime
3M Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite mineral and tough paper backing.
3M Floor Surfacing Rolls are recommended for general drum sanding. They are especially good for removing gummy finishes. This abrasive cuts fast.
