-
×
Dynabrade 48532 3" Dia. Right Angle Disc Sander, Rear Exhaust, .4 HP, 20,000 RPM
1 × $734.00 -
×
Dynabrade 59342 Exhaust Cover, Non-Vacuum, Extreme
1 × $7.97 -
×
Dynabrade 80430 PCB TLC 110v
1 × $107.52
-
×
Dynabrade 12202 Stockade Reciprocating Filer Versatility Kit, 2,400 SPM
1 × $1,332.00 -
×
Dynabrade 11213 Contact Arm Ass'y, 5/16" Dia. x 3/8" W, Steel Wheel, with 1/2" W Platen
1 × $84.80 -
×
Dynabrade 55522 .3 hp Straight-Line, 3" Extended Die Grinder, Aluminum Housing 25,000 RPM, Rear Exhaust, 1/4" Collet
1 × $793.00 -
×
![Dynabrade 96004 [1-1/4" Thread - 1-1/4" Non-Thread], Non-Conductive Vacuum Hose Swivel Cuff](https://store.alloycoatingsupply.com/wp-content/uploads/2018/08/96004-300x300.jpg)
Dynabrade 96004 [1-1/4" Thread - 1-1/4" Non-Thread], Non-Conductive Vacuum Hose Swivel Cuff
1 × $22.97 -
×
Dynabrade 11604 1" W x 7" L Soft Platen Pad 5-Pkg.
1 × $50.50 -
×
Dynabrade 52100 .5 hp Straight-Line Die Grinder, Rear Exhaust, 950 RPM, 1/4" Collet
1 × $963.00 -
×
Dynabrade 91579 6" Dynacut Extreme Orange Premium Film Disc, 400 Grit, Hook & Loop, Non-Vacuum, 50/Box
1 × $42.77 -
×
Dynabrade 79827 DynaSpark ZA 4.5" x .045" x 7/8" T42 Right Angle, Box of 10 Discs
10 × $3.24 -
×
Dynabrade 25190 Housing Assembly for 54430
1 × $272.09
-
×
Dynabrade 11869 Spacer
1 × $16.68
-
×
Dynabrade 96489 Screw
1 × $2.07
-
×
Dynabrade X51ESD 5" Dia. Central-Vacuum Dynorbital Extreme Random Orbital Sander for ESD
1 × $286.00 -
×
Dynabrade 01007 Bearing
1 × $17.36 -
×
Dynabrade 57996 - 4-1/4" (108 mm) W x 4-1/2" (114 mm) L Non-Vacuum Dyanbug "Model T" Disc Pad, Hook-Face, Short Nap
1 × $16.68
-
×
Dynabrade 11219 Contact Arm Ass'y, 1" Dia. x 3/8" W, Radiused Rubber Wheel, with no Platen
1 × $74.31 -
×
Dynabrade 05035 Housing for 05028 Motor
1 × $109.36
-
×
Dynabrade 64652 48" (122 cm) W x 96" (244 cm) L Downdraft Sanding Table, 230 V (AC)
1 × $12,204.20 -
×
Dynabrade 96503 - 6-32 x 3/8" Button Head Cap Screw
1 × $2.07
Insize 7341-5S, PIN GAGE HANDLE (with 1pc handle and 6 pairs of collecting bushes), .228-281″, 6928640370618
$40.39
Wrench is needed to install pins.
Clamping bushes (.008-.281″) are made of brass, clamping bushes (.281-1.010″) are made of aluminum.
Related products
Measuring/ Inspection Instruments
$47.42
Reflective Sheeting
3M 80298, Two-Handled Textured Surface Applicator TSA-4, Large Area Roller, 1Ea/Case, 7000005261
$544.91
Measuring/ Inspection Instruments
$56.64
Measuring/ Inspection Instruments
Insize 4209-4, LONG HANDLE TELESCOPING GAGE, 1-1/4 ~ 2-1/8″, 6928640311567
$16.80
Measuring/ Inspection Instruments
Insize 4209-6, LONG HANDLE TELESCOPING GAGE, 3-1/2 ~ 6″, 6928640311581
$16.80