-
×
Dynabrade 11475 Dynabelter Abrasive Belt Tool, Standard Duty
1 × $1,520.00 -
×
Standard Abrasives 716916, Cartridge RoII Mandrel, 6997818, 1/8 in x 3/4 in x 1/4 in x 6 in CM-XL, 7010368732
5 × $12.14 -
×
3M 86992, Diamond Disc, 3" Roloc, 674W, 120 Mesh, TR, 7100143477, Box of 5
2 × $54.54 -
×
3M™ 07012, Supplied Air Hose W-9435-100/07012(AAD), 100 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005375, 1 EA/Case
1 × $435.37 -
×
3M 97956, Super 77 CA Multipurpose Spray Adhesive, Low VOC <25%, Clear, 24 fl oz Can, 7100014109, 12/Case
12 × $16.85 -
×
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113
1 × $0.86 -
×
ACS Diamond Cloth Belt, CX1250 3" X 90" 75U
2 × $171.30 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,245.00 -
×
3M 26586, Accuspray Refill Pack for PPS Series 2.0, Red, 2.0 mm, 7100161517
5 × $10.20 -
×
Insize 7341-6S, PIN GAGE HANDLE (with 1pc handle and 6 pairs of collecting bushes), .281-.341", 6928640360671
1 × $46.70 -
×
3M 66635, Cloth Belt 341D, P100 X-weight, 6 in x 48 in, Film-lok, Single-flex, 7000118867, 20 per case
20 × $9.47 -
×
ACS Diamond Cloth Belt, CX1250 1" X 64" 125U
6 × $40.60
-
×
3M 11412, Roloc Disc 361F, 36 YF-weight, TR, 1 in, Die R100N, 7000045092
1000 × $0.60 -
×
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
1000 × $0.58 -
×
Dynabrade 14360 Pneumatic Pipe Belt Finisher
1 × $1,679.00 -
×
Dynabrade 55501 .1hp Pencil Grinder, Twin Turbine, 100,000 RPM, Nickel-Plated Aluminum Housing, 3mm Collet
1 × $529.55 -
×
Dynabrade 64350 26" W x 36" L (660 mm W x 914 mm L) Metal Capture Downdraft Station, 230 V (AC)
1 × $18,352.22 -
×
3M™ 72013, Adapter 529-04-50, 110-120 VAC, 7000131705, 1 EA/Case
1 × $129.94 -
×
3M 20909, PSA Cloth Disc 348D, 80 X-weight, 2 in x NH, Die 200P, 7000118873
200 × $0.78 -
×
3M 16976, Scotch-Brite Light Cleansing Hand Pad 7445, HP-HP, Nepheline Syenite Super Fine, White, 6 in x 9 in, 7000000727, 60/Case
1 × $84.69 -
×
3M 01326, PSA Cloth Disc 348D, P240 X-weight, 3 in x NH, Die 300V, 7000045069
200 × $0.95 -
×
3M 28817, STIKIT LOW PROFILE DISC PAD, EXTRA FIRM, 5 IN X 3/8 IN X 5/16 IN, 24 EXTERNAL, 7010361145
10 × $26.24 -
×
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
500 × $0.67 -
×
3M 15060, Roloc + Button 7, 3/8 in Red, 7000045945
1 × $5.62 -
×
Standard Abrasives 701616, PSA A/O Disc, 12 in x NH, 50, 7010369977
10 × $6.01
3M 09310, Regalite Floor Surfacing Rolls, 8 in x 50 yd, 752I, 40 Grit, 7010384132
$229.48
Factory Stock, 7-10 Day Leadtime
3M Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite mineral and tough paper backing.
3M Floor Surfacing Rolls are recommended for general drum sanding. They are especially good for removing gummy finishes. This abrasive cuts fast.
