3M Screen Cloth Disc Hand Pad Goes Hand in Hand with 3M Screen Cloth Discs
3M Screen Cloth Disc Hand Pad goes hand in hand with 3M Screen Cloth Discs. Use die numbers 500GC (5? diameter with 2 tabs), 600JR (6? diameter with 2 tabs) and 800JM (8? diameter with 2 tabs) (sold separately). Mineral is adhered to both sides of 3M screen cloth discs, so when one side of the disc wears down the other may be used. While operators typically use these discs dry during hand sanding, the screen is water resistant and may be used with a lubricant if necessary.
Each disc features two tabs. The holder pad has two ?tacks? designed for these tabs. Operators simply pierce the tabs on the disc with the tacks on the hand pad to secure the disc in place. This easy and convenient attachment system eliminates the need for adhesive, which has two key benefits. First, it helps minimize the mess that adhesive can sometimes cause. Second, as one side of the disc is not sacrificed for adhesive, both sides may be used and the disc is put to optimal use.
A Remedy for Small Surface Imperfections
When eliminating surface imperfections, evenly-applied pressure and consistent finishes tend to be top concerns. With these goals in mind, we created the 3M Screen Cloth Disc Hand Pad. This abrasive accessory helps operators apply even pressure to their 3M screen cloth discs and, consequently, the substrate. With a hand strap attached to the back of the pad, the accessory is easy to use and provides access to workpiece areas that may be hard to reach with machines.
This hand pad is available in soft and medium densities. A medium density pad is firmer ? a good match for highlighting or leveling the surface to reveal high and low spots. A soft density pad is a good match for light scuffing of the substrate.
Prior to applying primer or paint, ridding the substrate of small imperfections is no easy task. We know that operators value a clean, polished look. The 3M Screen Cloth Disc Hand Pad was engineered to help them get there.

ACS CX1250 Diamond Belt, 1/2" X 24" 60u
3M 82597, Hot Melt Adhesive 3764 AE, Clear, 0.45 in x 12 in, 7000000885, 11 LBS/Case
3M 55379, Flap Disc 566A, 60, T27 Quick Change, 4-1/2 in 5/8"-11, Giant, 7010327377, 10 per case
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
3M 33349, 641WY 1/4" X 24", 220 Mesh Diamond Cloth Belt, 7010534919
3M 21028, Floor Surfacing Discs, 12 Grit, 16 in x 2 in, 7010314898
3M 09292, Rubber Sanding Block, 7000126886
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
3M 76630, Roloc Disc 777F, 50 YF-weight, TR, 2 in, Die R200P, 7000045627
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
3M 28830, 675L, 1/2" X 72", 74u, Diamond Microfinishing Film Belt 7010508919
3M 36518, Green Corps Abrasive File Belt, 80 Grit, 1/2 in x 18 in (12.7 mm x 457.2 mm), 7100226321, 20 Belts Per Carton, 5 Cartons Per Case
3M™ 07011, Supplied Air Respirator Hose W-9435-50/07011(AAD), 7000005373, 1 EA/Case
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
3M 20905, PSA Cloth Disc 348D, P180 X-weight, 2 in x NH, Die 200P, 7000118876
3M 16066, PPS Mix Ratio Inserts, Mini (6 fl oz), 7000120511
3M 22646, Scotch-Weld Epoxy Adhesive 1838L, Translucent, Part B/A, 1 QuartKit, 7000036224, 6/case
3M 25705, Scotch-Brite Roloc Surface Conditioning Disc, SC-DR, A/O Medium, TR, 3/4 in, 7000120983, 200/case
3M 20105, Scotch-Weld Epoxy Adhesive 1751, Gray, Part B/A, 1 Gallon Kit, 7000046339, 2/case
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
3M 22409, Roloc Disc 361F, P120 XF-weight, TR, 1-1/2 in, Die R150S, 7000045103
3M 05579, Cloth Belt 577F, 80 YF-weight, 2 in x 48 in, Film-lok, Single-flex, 7010308379, 50 per case
3M 69457, Cloth Belt 777F, 60 YF-weight, 1/2 in x 12 in, Fabri-lok, Single-flex, 7010299175, 200 per case
3M 27359, Cloth Belt 970DZ, 24 YN-weight, 25 in x 75 in, Film-lok, Single-flex, 7010361224, 2 per case
3M 77197, Scotch-Brite™ Roloc™ Deburr and Finish PRO Unitized Wheel,TR, 3 in x 1/8 in x NH, 8C CRS+, 7100109130, 40/box
3M 36882, Self-Stick Liquid Protection Fabric, Blue, 56 in x 300 ft, 7100169350
3M 20930, PSA Cloth Disc 348D, P120 X-weight, 1 in x NH, Die 100N, 7000118916
3M 71358, 641WY 1/4" X 24", 600 Mesh Diamond Cloth Belt, 7010534894
Dynabrade 97571 1/2" NPT Male Safety Coupler
3M 62818, Adhesive Sealant 760 UV, Black, 600 mL Sausage Pack, 7000121496, 12/Case
3M 20856, Scotch-Weld Epoxy Adhesive 2216, Translucent, Part B/A, 1 Gallon Kit, 7000046480, 2/case
3M 55037, Cubitron II Cloth Belt 984F, 60+ YF-weight, 6 in x 48 in, Film-lok, Single-flex, 7010308910, 20 per case
3M 21762, Stikit Cloth Disc Roll 341D, 60 X-weight, 6 in x NH, Die 600Z, 7000118780
3M 14316, Marine Adhesive Sealant 4000 UV, Black, 295 mL Cartridge, 7010367955, 12/Case
3M 01326, PSA Cloth Disc 348D, P240 X-weight, 3 in x NH, Die 300V, 7000045069
3M 36881, Self-Stick Liquid Protection Fabric, Blue, 48 in x 300 ft, 7100169351
Norton 66254489957 Wheel, Vortex-7am, 6" X 1/2" X 1" C2312 Nor VTME7 PH VTC+, 4 Each
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
3M™ 07010, Supplied Air Respirator Hose W-9435-25/07010(AAD), 25 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005374, 1 EA/Case
3M 47838, EMI Copper Foil Shielding Tape 1181, 23 in x 18 yd (58.42 cm x 16.5 m), 7000058121
3M 81356, Venture Tape White Aluminum Foil Tape 1558HT, 72 mm a 45.7 m, 5.4 mil, 7010335933
3M 11000, Roloc Disc 361F, 24 YF-weight, TR, 2 in, Die R200P, 7000028183
3M™ 17323, Versaflo™ Respiratory Helmet Assembly M-407, with Premium Visor and Flame Resistant Shroud, 7000002395, 1 EA/Case
3M 97419, Aluminum Foil Tape 3380, Silver, 48 mm x 45 m, 3.25 mil, 7000049613
Dynabrade 50281 4-1/2" Dia. Disc Pad, Spiral-Face, Medium Density, 5/8"-11 Thread
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
3M 20851, Scotch-Weld Epoxy Adhesive 2216, Translucent, Part B/A, 2 fl oz Kit, 7000046479, 6/case
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
3M 22404, Roloc Disc 361F, 80 YF-weight, TR, 3 in, Die R300V, 7000045100
3M 97421, Aluminum Foil Tape 3380, Silver, 72 mm x 45 m, 3.25 mil, 7010375681
Standard Abrasives 700743, Cartridge RoII Mandrel, 1/8 in x 3/4 in x 1/8 in x 1 in x 2-3/4 in CM-4, 7010368728
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091
3M 01328, PSA Cloth Disc 348D, P180 X-weight, 3 in x NH, Die 300V, 7000045068
3M 34784, 663FC, 3" X 30", 20u, Trizact Diamond Belt, 7100063665 
