A Flexible Foil Tape for a Range of Environments
3M™ Aluminum Foil Tape 3380 is a nominal 1.8 mil foil backed tape that excels in a range of applications and environments including low temperatures. It is excellent for general-purpose heat shielding and light reflecting applications. Its aluminum foil backing is coated with a cold weather acrylic adhesive. The aluminum backing conforms around corners and to curved and irregular surfaces with ease and is an ideal choice for applications on both fibrous and sheet metal ductwork. The adhesive performs extremely well in demanding cold and hot temperature applications. The tape is hand tearable and installs easily, eliminating the need for additional tools or applications methods.
3M™ Aluminum Foil Tape 3380 is UL723 Classified (10/10 Flame/Smoke Rating).
Recommended Applications
- Fibrous ductboard, sheet metal ducts and blankets
- Applications requiring flexibility and good temperature performance
- General purpose foil tape for a variety of applications
Excels in Demanding Temperatures
3M™ Aluminum Foil Tape 3380 is coated with a pressure sensitive cold weather solvent acrylic adhesive specifically designed for cold weather applications. This adhesive performs well in both demanding temperature and humidity applications. It adheres immediately on contact to a variety of materials, including fibrous and sheet metal ducts. With a service temperature ranging from -40°F/-40°C to 260°F/127°C, this tape can be applied in a variety of environmental conditions. Once bonded, it will provide good holding power for extended periods with good aging properties that resist lifting and curling.
3M™ Metal Foil Tapes
Aluminum is just one of the metal-backed tapes available from 3M. Our foil tapes resist failure from common sources of degradation including moisture, ultraviolet rays and many chemicals, and are commonly used for reflecting, wrapping, masking, sealing, and more in applications from air ducts to washing machines. As with all 3M products, our 3M™ Aluminum Foil Tape 3380 is supported by exclusive 3M technical expertise and application advice. 3M aluminum foil tapes are suitable for demanding applications in construction, aerospace, automotive, appliance, maintenance, repair and operations and many more segments. They are also thermally conductive for heating/cooling efficiency.
Bringing Better Ideas to the Surface through Science and Innovation
In our 3M Industrial Adhesives and Tapes Division, we apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, our technologies help customers like you deliver competitive products to the market faster and more efficiently.

Dynabrade 57926 6" Dia. Dynabug "Model T" Orbital Sander, Non-Vacuum, 20,000 RPM, 3/32" Orbit, PSA
Dynabrade 25146 Housing Assy for Model #54387
Dynabrade 59332 Rear Bearing Plate
Dynabrade 22070 Downdraft Table Accessory Pack (Air Manifold, FRL and On/Off Air Valve)
Dynabrade 64654 48" (122 cm) W x 96" (422 cm) L Downdraft Sanding Table, 460 V (AC)
Dynabrade 96241 Bearing Press Tool
Dynabrade 51348 2" Dia. Locking-Type Disc Pad, Medium Density, 1/4"-20 Thread
Dynabrade 59057 "Top Hat" Seal
Dynabrade 57841 Pad Top Assembly
Dynabrade 50065 1/8" (.125) Capacity Collet Sleeve
Dynabrade 78328 3" x 1" x 1/4 Shank, 60 Grit, Dynabrite Interleaf Wheel, 10/pack
Dynabrade 62111 DynaFast Foot Activated Screening Thermometer (without Thermometer)
Dynabrade 90266 3-1/2" W x 15-1/2" L 36 Grit A/Z DynaCut Belt, 10/pack
Dynabrade 57822 Boot
Dynabrade 78167 1-1/4" Dia. x 180 Grit S/C Non-Vacuum PSA DynaCut Disc 25/pack
Dynabrade 78645 1/2" Dia. x 1-1/2" W x 1/8" Center Hole, Z/A, 60 Grit, 100/pack
Dynabrade 13300 Mini-Dynisher Finishing Tool, .4 HP, Rear Exhaust, 3,200 RPM, 5/8" Arbor
Dynabrade 47202 .4 hp Straight-Line Die Grinder, Rear Exhaust, 5,000 RPM, 1/4" Collet
Dynabrade 65074 Tracking Wheel
Dynabrade 53270 7" (180 mm) Dia. Right-Angle Disc Sander
Dynabrade 55587 .4hp Mini Right Angle Drill with Adjustable Angle Head, 5,000 RPM, Rear Exhaust, 9/32"-40 Thread
Dynabrade 53610 Adapter
Dynabrade Nitro Series NZ1 NitroZip, Eraser Tool
Dynabrade 11518 Rubber Drive Wheel
Dynabrade 91542 5" Dynacut Extreme Orange Premium Film Disc, 320 Grit, Hook & Loop, Vacuum Holes, 50/Box
Dynabrade 45305 Motor Housing, Straight
Dynabrade 97045 Throttle Plunger Pin
Dynabrade 64951 Pivot Plate
Dynabrade 18823 Vane Set (4pk)
Dynabrade 64205 33" (84 cm) W x 41" (104 cm) L Downdraft Sanding Table, 230 V (AC)
Dynabrade 79070 1/4" W x 18" L 36 Grit A/Z DynaCut Belt, 50/pack
Dynabrade 79197 3-1/2" W x 15-1/2" L 80 Grit DynaCut Premium Ceramic Belt, 10/pack
Dynabrade 13518 Dynastraight 6" (152 mm) Extension Finishing Tool, 1 HP, Rear Exhaust, 4,500 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
Dynabrade 62346 Interface Ring
Dynabrade 79375 6" Dia. x 80 Grit A/O Hook Multi-Hole Vacuum Film-Backed DynaCut Disc, 100/Box
Dynabrade 79538 1" W x 24" L Premium Very Fine Plus NWN DynaBrite Belt, 10/pack
Dynabrade 52772 3/8" Reversible Drill, .5 HP, Rear Exhaust, 450 RPM
Dynabrade 13200 Dynastraight Finishing Tool, .7 HP, Rear Exhaust, 950 RPM
Dynabrade 45297 Drop-In Motor
Dynabrade 51076 Spindle Housing
Dynabrade 61461 Raptor Vac Electric Portable Vacuum System, 7.9 Gallon, 120 V
Dynabrade 79898 8" Dynacut 400 Grit Extreme Orange Scalloped Edge Discs, 25 per box
Dynabrade 90295 1" W x 18" L Medium NWN DynaBrite Premium Belt, 10/pack
Dynabrade 60221 - 30,000 lb. Jack with 1/2" Vi-Sorb Pad
Dynabrade 79938 3-1/2" Dia. x 220 Grit A/O Non-Vacuum Hook-Face DynaCut Disc, 100/Pack
Dynabrade 78459 1" Dia. x 3/8", 3-48 Female Center Thread, 120 Grit A/O, 8 Ply, J-DynaCut Cross Pad, 100/pack
Dynabrade 50281 4-1/2" Dia. Disc Pad, Spiral-Face, Medium Density, 5/8"-11 Thread
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor 
