The 3M Particulate Cartridge 2076HF Hydrogen Fluoride, P95, with Nuisance Level Acid Gas Relief helps provide respiratory protection in environments containing hydrogen fluoride and certain oil and non-oil based particles. The cartridge/filter combination is effective for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces. The filter also offers nuisance level odor relief from acid gases that are below the PEL. Nuisance level refers to concentrations not exceeding OSHA PEL or other applicable government exposure limits, whichever is lower. Do not use for respiratory protection against acid gases in environments that are immediately dangerous to life or health (IDLH). Inventory needs and training requirements of safety equipment are reduced because this filter works for many different applications. This filter is commonly used in the following industries: aluminum processing, chemicals and oil and gas.
The cartridge/filter combination works with a wide range of facepieces, including 3M Half and Full Facepieces 6000, 7000 and FF-400 Series. If used with 3M Adapter 502, the filter may also be used with 3M Respirator 5000 Series or 3M Cartridge 6000 Series. If used with the 3M Scott AV-632 Bayonet Adapter, the filter may be used with the 3M Scott AV-3000 HT and AV-3000 SureSeal facepieces. The cartridge is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing hydrogen fluoride and certain oil and non-oil based particles. The filter has been assigned the color code ?Olive? in the NIOSH system. Passing NIOSH?s P-series test criteria, the 2076HF P95 filter provides at least 95 percent filter efficiency against particles.
Breathing hazardous particles or hydrogen fluoride gas can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M Particulate Cartridge 2076HF to help reduce exposure to certain particles and hydrogen fluoride.

3M 53034, 663FC, 3/4" X 90", 20u, Diamond Trizact Belt 7100205969
Norton 66254432925 Wheel, 3" X 1/2" X 1/4" Bear-Tex, Rapid Blend, Non-Woven 5 Density, A/O, M Grit, 20 Each
3M 50216, Temflex Cotton Friction Tape 1755, 3/4 in x 82-1/2 ft, Black, 7010297809
3M 20903, PSA Cloth Disc 348D, P240 X-weight, 2 in x NH, Die 200P, 7000118877
3M 20912, PSA Cloth Disc 348D, 40 X-weight, 2 in x NH, Die 200P, 7000118920
3M™ 72122, Portable Compressed Air Filter and Regulator Panel 256-02-01, 100 cfm, 8 outlets, with Carbon Monoxide Monitor, 7000052147, 1 EA/Case
Standard Abrasives 713638, Cartridge RoII Mandrel, 3/32 in x 3/4 in x 1/8 in x 1 in x 2-3/4 in CM-2B, 7010294964
Standard Abrasives 853299, Quick Change TR S/C Unitized Wheel, 532, 2 in x 1/4 in, 7010294934
3M 22404, Roloc Disc 361F, 80 YF-weight, TR, 3 in, Die R300V, 7000045100
Dynabrade 95821 Dynabrade Air Lube 10W/NR, 4oz Bottle
Dynabrade 11476 Dynabelter Abrasive Belt Tool, Heavy-Duty
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
3M 30024, Shipping-Mate Case Sealing Adhesive, Clear, 24 fl oz Can (Net Wt 17.3 oz), 7000143197, 12/Case
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
3M™ 17379, Versaflo™ Length Adjusting Breathing Tube BT-30, 7100009685, 1 EA/Case
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
3M 22409, Roloc Disc 361F, P120 XF-weight, TR, 1-1/2 in, Die R150S, 7000045103
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
3M™ 07010, Supplied Air Respirator Hose W-9435-25/07010(AAD), 25 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005374, 1 EA/Case
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
3M 52793, Mold Remediation Respirator Kit 69097, Large, 7010316002, 2 Kits EA/Case 
