The 3M Particulate Cartridge 2076HF Hydrogen Fluoride, P95, with Nuisance Level Acid Gas Relief helps provide respiratory protection in environments containing hydrogen fluoride and certain oil and non-oil based particles. The cartridge/filter combination is effective for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces. The filter also offers nuisance level odor relief from acid gases that are below the PEL. Nuisance level refers to concentrations not exceeding OSHA PEL or other applicable government exposure limits, whichever is lower. Do not use for respiratory protection against acid gases in environments that are immediately dangerous to life or health (IDLH). Inventory needs and training requirements of safety equipment are reduced because this filter works for many different applications. This filter is commonly used in the following industries: aluminum processing, chemicals and oil and gas.
The cartridge/filter combination works with a wide range of facepieces, including 3M Half and Full Facepieces 6000, 7000 and FF-400 Series. If used with 3M Adapter 502, the filter may also be used with 3M Respirator 5000 Series or 3M Cartridge 6000 Series. If used with the 3M Scott AV-632 Bayonet Adapter, the filter may be used with the 3M Scott AV-3000 HT and AV-3000 SureSeal facepieces. The cartridge is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing hydrogen fluoride and certain oil and non-oil based particles. The filter has been assigned the color code ?Olive? in the NIOSH system. Passing NIOSH?s P-series test criteria, the 2076HF P95 filter provides at least 95 percent filter efficiency against particles.
Breathing hazardous particles or hydrogen fluoride gas can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M Particulate Cartridge 2076HF to help reduce exposure to certain particles and hydrogen fluoride.

Dynabrade 91162 3/8" W x 13" L 60 Grit A/O DynaCut Belt, 50/pack
3M 03601, Plastic Emblem and Trim Adhesive, 1 fl oz, 7010294867, 12 per case
3M 86745, Diamond Disc, 2" Roloc, 674W, 120 Mesh, TR, 7100022116, Box of 10
ACS Diamond Cloth Belt, CX1250 1/2" X 72" 125U
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
3M 62387, Centurion Impact Safety Goggles 452 40300-00000-10, Clear Lens, 10 ea/Case, 7000127564
3M 14725, Foam and Fabric Spray Adhesive 24, Orange, 16 fl oz Can (Net Wt 13.8 oz), 7100179450, 12/Case
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
3M 22409, Roloc Disc 361F, P120 XF-weight, TR, 1-1/2 in, Die R150S, 7000045103
Dynabrade 95848 Dynabrade Gear Oil
3M 70894, 641WY 1/2" X 24", 100 Mesh Diamond Cloth Belt, 7010533228
3M™ 94275, Versaflo™ Gold Coated Tinted Over-Visor with UV/IR Protection M-967N, 70071696879, 1 EA/Case
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113
3M 62817, Adhesive Sealant 760 UV, Black, 290 mL Cartridge, 7100139449, 12/Case
Standard Abrasives 713276, Aluminum Oxide Handy Roll, P180 J-weight, 2 in x 50 yd, 7100037246
3M 05049, Cloth Belt 384F, 80+ XF-weight, 1 in x 30 in, Fabri-lok, Full-flex, 7100141431, 200 per case
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
3M 22405, Roloc Disc 361F, P100 YF-weight, TR, 3 in, Die R300V, 7000045102
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
Dynabrade 14360 Pneumatic Pipe Belt Finisher
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
3M 45038, Wheel Adapter Kit No.3, 5/8-11 External, 7000028423
3M 95442, Selfwound PVC Tape 1506R, Black, 1-1/2 in x 36 yd, 6 mil, 24 rollsper case, 7100043914
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
3M™ 07010, Supplied Air Respirator Hose W-9435-25/07010(AAD), 25 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005374, 1 EA/Case
3M 22404, Roloc Disc 361F, 80 YF-weight, TR, 3 in, Die R300V, 7000045100
Dynabrade 14010 Dynafile Abrasive Belt Tool Versatility Kit
3M 54159, Full Facepiece Reusable Respirator 6900 Large, 7000002037, 4 EA/Case 