The 3M Particulate Cartridge 2076HF Hydrogen Fluoride, P95, with Nuisance Level Acid Gas Relief helps provide respiratory protection in environments containing hydrogen fluoride and certain oil and non-oil based particles. The cartridge/filter combination is effective for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces. The filter also offers nuisance level odor relief from acid gases that are below the PEL. Nuisance level refers to concentrations not exceeding OSHA PEL or other applicable government exposure limits, whichever is lower. Do not use for respiratory protection against acid gases in environments that are immediately dangerous to life or health (IDLH). Inventory needs and training requirements of safety equipment are reduced because this filter works for many different applications. This filter is commonly used in the following industries: aluminum processing, chemicals and oil and gas.
The cartridge/filter combination works with a wide range of facepieces, including 3M Half and Full Facepieces 6000, 7000 and FF-400 Series. If used with 3M Adapter 502, the filter may also be used with 3M Respirator 5000 Series or 3M Cartridge 6000 Series. If used with the 3M Scott AV-632 Bayonet Adapter, the filter may be used with the 3M Scott AV-3000 HT and AV-3000 SureSeal facepieces. The cartridge is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing hydrogen fluoride and certain oil and non-oil based particles. The filter has been assigned the color code ?Olive? in the NIOSH system. Passing NIOSH?s P-series test criteria, the 2076HF P95 filter provides at least 95 percent filter efficiency against particles.
Breathing hazardous particles or hydrogen fluoride gas can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M Particulate Cartridge 2076HF to help reduce exposure to certain particles and hydrogen fluoride.

3M 87179, Scotch-Weld Epoxy Adhesive 2216NS, Tan, Part B, 5 Gallon Drum (Pail), 7010309882
3M™ 17323, Versaflo™ Respiratory Helmet Assembly M-407, with Premium Visor and Flame Resistant Shroud, 7000002395, 1 EA/Case
3M 29611, 641WY 1/4" X 24", 100 Mesh Diamond Cloth Belt, 7010534832
Standard Abrasives 726070, A/O C2 Straight Precision Cartridge Roll, 5/8 in x 2-1/2 in x 1/4 in 60, 7100098797
Dynabrade 53245 7" Dia. Type 27 Vertical Depressed Center Wheel Grinder, 3 HP, 8,500 RPM, 5/8"-11 Spindle
3M 21339, Wetordry Paper Disc 431Q, 400 C-weight, 8 in x NH, Die 800L, 7000120331
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091
Dynabrade 95843 Dynabrade Air Lube 10W/NR, 1 Gallon
3M 08302, Ultrapro Autobody Sealant, Clear, 5 oz Tube, 7000120449, 6 per case
Dynabrade 53533 Cone or Plug Grinder (Triple Extension)
3M 13085, Wetordry Cloth Disc 281W, 8 in x NH, P, 7000045611
3M 26613, Accuspray Atomizing Head Refill Pack for 3M PPS Series 2.0,Green, 1.3 mm, 7100141415 (4 Nozzles/Kit)
3M 01328, PSA Cloth Disc 348D, P180 X-weight, 3 in x NH, Die 300V, 7000045068
Dynabrade 14010 Dynafile Abrasive Belt Tool Versatility Kit
3M 45120, Cartridge RoII Mandrel, 3/32 in x 3/4 in x 1/4 in, 7010328349
3M 26054, PPS Series 2.0 Adapter, Type S18, 3/8 Female, 18 Thread NPS,
4 per case
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
Dynabrade 51622 .1 hp Straight-Line Pencil Grinder, Central Vacuum, 35,000 RPM, 3mm Collet
3M 22405, Roloc Disc 361F, P100 YF-weight, TR, 3 in, Die R300V, 7000045102
3M 14270, Disc Pad Face Plate, 4-1/2 in Hard Black, 7000144144
3M 30024, Shipping-Mate Case Sealing Adhesive, Clear, 24 fl oz Can (Net Wt 17.3 oz), 7000143197, 12/Case
3M 11412, Roloc Disc 361F, 36 YF-weight, TR, 1 in, Die R100N, 7000045092
3M 20360, Scotch-Weld Epoxy Adhesive 2216, Gray, Part B, 5 Gallon Drum (Pail), 7000046360
Dynabrade 95544 Gear Grease, 2.5oz. Tube
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
3M 14895, Cloth Belt 777F, 80 YF-weight, 1 in x 42 in, Film-lok, Single-flex, 7010299926, 200 per case
3M 32990, Professional Multi-purpose Drop Down Respirator 62023DHA1-C, 7010377307 
