-
×
3M 71358, 641WY 1/4" X 24", 600 Mesh Diamond Cloth Belt, 7010534894
1 × $9.18 -
×
Dynabrade 51630 .1 hp Straight-Line Extension Pencil Grinder, Central Vacuum, 1/8" Collet
1 × $634.00 -
×
3M 09548, Scotch-Brite EXL Deburring Wheel, XL-WL, 8S Fine, 6 in x 1/2 in x 1 in, 7000136514
4 × $59.35 -
×
Dynabrade 95544 Gear Grease, 2.5oz. Tube
1 × $11.43 -
×
3M 21463, Marine Adhesive Sealant 5200, White, 5 Gallon Drum (Pail), 7010325698
1 × $1,029.08 -
×
Standard Abrasives 727398, Buff and Blend Cross Buff HS, A/O Coarse, 2 in x 3/4 in x 2 Ply x 1/4-20, 7010369357
25 × $7.02 -
×
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
1 × $500.06 -
×
ACS CX1250 Diamond Belt, 1/2" X 24" 250u
12 × $8.20 -
×
3M 01328, PSA Cloth Disc 348D, P180 X-weight, 3 in x NH, Die 300V, 7000045068
200 × $0.95 -
×
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
1 × $2,225.47 -
×
3M 00570, DynatronAuto Seam Sealer Caulk, 570, White, 12 oz, 7000125070, 12 per case
12 × $17.93 -
×
Dynabrade 51740 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet, with Mount Stem
1 × $512.00 -
×
3M 77197, Scotch-Brite™ Roloc™ Deburr and Finish PRO Unitized Wheel,TR, 3 in x 1/8 in x NH, 8C CRS+, 7100109130, 40/box
40 × $11.06 -
×
3M™ 17323, Versaflo™ Respiratory Helmet Assembly M-407, with Premium Visor and Flame Resistant Shroud, 7000002395, 1 EA/Case
2 × $746.76 -
×
Dynabrade 14000 Dynafile Abrasive Belt Tool
1 × $734.00 -
×
3M 04029, Scotch-Brite Hand Pad 7447, HP-HP, A/O Very Fine, Maroon, 6 in x 9 in, 7000000728, 60/Case
1 × $82.43 -
×
3M 19764, Utility Cloth Sheet 314D, 9 in x 11 in P320 J-weight, 7000000352
250 × $1.37 -
×
3M 35124, Grippy Sanding Cloth Trial Kit, 7100230957
10 × $6.84 -
×
3M 76751, Roloc Disc 777F, 60 YF-weight, TS, 3 in, Die RS300V, 7010363900
200 × $1.43 -
×
3M 85309, Aluminum Foil Tape 425, Silver, 3/4 in x 60 yd, 4.6 mil, 7100053743
48 × $29.90 -
×
3M 92568, Temflex, Black - AM, 19mm x 18m (3/4in x 60ft), 7100169254
100 × $1.52 -
×
3M 16831, Urethane Seam Sealer, 08361, Gray, 310 mL Foil Pack, 7000120461, 6 per case
6 × $28.47 -
×
3M™ 07011, Supplied Air Respirator Hose W-9435-50/07011(AAD), 7000005373, 1 EA/Case
1 × $274.26 -
×
3M 21543, Scotch-Brite Roloc Clean and Strip XT Pro Extra Cut Disc, TR, 2 in x NH, A XCS, 7100179815, 60/box
1 × $4.57
3M 43464, Molten Metal Neck Guard NC2-OR, Orange, 10 EA/Case, 7100296470
$432.00
Factory Stock, 7-10 Day Leadtime
3M Molten Metal Neck Guard NG2 GR is designed to protect against molten metal splash, radiant heat and flame hazards. It attaches to 3M and other hard hats using hook and loop fasteners on the inside of the shell. Internal attachments allow for use with or without earmuffs attached to the hard hat.
3M Molten Metal Neck Guard, NG2 GR, is designed to protect against molten metal splash, radiant heat and flame hazards. It attaches to 3M and other hard hats using hook and loop fasteners on the inside of the shell. The NC2 GR uses a streamlined design to provide protection against small splashes and spatter. Internal attachments allow for use with or without earmuffs attached to the hard hat.
