-
×
Dynabrade 95544 Gear Grease, 2.5oz. Tube
1 × $11.43 -
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
200 × $1.39 -
×
Dynabrade 14360 Pneumatic Pipe Belt Finisher
1 × $1,679.00 -
×
3M™ 72122, Portable Compressed Air Filter and Regulator Panel 256-02-01, 100 cfm, 8 outlets, with Carbon Monoxide Monitor, 7000052147, 1 EA/Case
1 × $6,424.71 -
×
3M™ 07012, Supplied Air Hose W-9435-100/07012(AAD), 100 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005375, 1 EA/Case
1 × $435.37 -
×
3M 95438, Selfwound PVC Tape 1506R, White , 2 in x 36 yd, 6 mil, 18 rolls percase, 7100043837
18 × $14.35 -
×
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113
2 × $0.86 -
×
3M 21543, Scotch-Brite Roloc Clean and Strip XT Pro Extra Cut Disc, TR, 2 in x NH, A XCS, 7100179815, 60/box
1 × $4.57 -
×
Dynabrade 95848 Dynabrade Gear Oil
1 × $12.98 -
×
3M 20913, PSA Cloth Disc 348D, 36 X-weight, 2 in x NH, Die 200P, 7000118919
200 × $0.94 -
×
3M 05049, Cloth Belt 384F, 80+ XF-weight, 1 in x 30 in, Fabri-lok, Full-flex, 7100141431, 200 per case
200 × $1.92 -
×
3M 19770, Utility Cloth Sheet 314D, 9 in x 11 in P120 J-weight, 7000000358
250 × $1.37 -
×
3M 66261, Wind Protection Tape Edge Sealer W2600, 50 ml (1.7 fluid ounce), 7000049496, 12/Case
12 × $69.98 -
×
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
500 × $0.67 -
×
3M 06840, Booth Coating, 5 gal, 7000120531
1 × $467.27 -
×
3M 45557, Cubitron ll Cloth Belt 784F, 60+ YF-weight, 2 in x 72 in, Film-lok, Single-flex, 7010299100, 50 per case
50 × $9.53 -
×
3M 16219, PPS Liner Dispenser: Large, Standard, or Midi, 7100041780
1 × $46.96 -
×
Dynabrade 53270 7" (180 mm) Dia. Right-Angle Disc Sander
1 × $1,585.00 -
×
3M 88870, PSA Cloth Disc 777F, 80 YF-weight, 12 in x NH, Die 1200B, 7000120239
10 × $13.79
3M 09320, Regalite Floor Surfacing Rolls, 12 in x 50 yd, 752I, P80 Grit, 7010314927
$245.03
Factory Stock, 7-10 Day Leadtime
3M Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite mineral and tough paper backing.
3M Floor Surfacing Rolls are recommended for general drum sanding. They are especially good for removing gummy finishes. This abrasive cuts fast.
