Conformable Tape with a Strong Hold
3M™ General Purpose Masking Tape 203 was designed to provide instant adhesion to a variety of surfaces. Its moderate adhesion supplies adequate holding power and helps resist lifting or curling. In addition, General Purpose Masking Tape 203 is conformable, maintaining integrity and seal when formed around corners and uneven surfaces. The crepe paper backing resists slivering and tears off the roll easily. With good paint hold-out and bleed-through resistance, this masking tape is ideal for many applications and removes cleanly from most substrates for up to 24 hours and has a temperature resistance of up to 200°F (93°C).
Recommended Applications
- MRO/Construction Painting
- Woodworking
- Entry level painting
- Appliance sealing and wrapping applications
What is Masking Tape?
Masking tape was developed specifically to help protect surrounding surfaces from overspray, provide clean paint lines, and remove easily and cleanly when finished. Masking tapes from 3M adhere well, resist solvents or water from the paint, and are strong enough to hang plastic sheeting, yet remove cleanly without damaging the subsurface. The backing, typically crepe paper, can conform to curved and irregular surfaces. The tape hand tears for tool-free application.

Dynabrade 14244 Contact Wheel Arm
Dynabrade 55226 Housing Cover, Sander
Dynabrade 76018 - 8 mm Air Line Ass'y, 5' Long
Dynabrade 58447 8" Dia. Central Vac-Ready 2-Hand Gear-Driven Sander, Central Vacuum, .45 HP, 900 RPM, Hook-Face
Dynabrade 91629 1-1/2" W x 24" L 320 Grit A/O DynaCut Belt, 10/pack
Dynabrade 76005 Spring-Action Coupler and Plug
Dynabrade 52169 Handle Assembly
Dynabrade 56884 5" Dia. Central Vacuum Dynorbital Supreme Random Orbital Sander, 3/8" Orbit
Dynabrade 56595 Air Motor Cylinder Assembly
Dynabrade 57850 3-2/3" W x 7" L Non-Vacuum Dynabug Disc Pad, Vinyl-Face
3M 92570, Temflex Vinyl Electrical Tape 165, Brown, 3/4 in x 60 ft (19 mm x 18 m), 6 mil, 7100169191
Dynabrade 51124 Collet, M8 x 1.0 Female Thread, 1/4" Capacity
Dynabrade 62346 Interface Ring
Dynabrade 51346 3" (51 mm) Dia. Locking-Type Disc Pad, Medium Density, 1/4"-20 Thread
Dynabrade 59182 6" Dia. Dynorbital-Spirit Random Orbital Sander, Central Vacuum, 3/16" Orbit
Dynabrade 01023 Speed Regulator
Dynabrade 55041 Valve
Dynabrade X61V 6" (152 mm) Dia. Central-Vacuum Dynorbital Extreme Random Orbital Sander, .3 HP, 12,000 RPM, 3/16" Orbit, Hook-Face
Dynabrade 11202 Contact Arm Ass'y, 5/8" Dia. x 1/8" W, Rubber Wheel, with 1/4" W Platen
Dynabrade 79702 - 5-1/2" Dynacut White Foam Flat Face Polishing Pad, Hook and Loop
Dynabrade 13506 Dynastraight Finishing Tool, 1 HP, Rear Exhaust, 3,400 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
Dynabrade 31968 Conductive Y Adapter
Dynabrade 13502 Dynastraight Finishing Tool, 1 HP, Rear Exhaust, 3,400 RPM, 1/2" (13 mm) Dia. Arbor
Dynabrade X3161H - 3" Mini Extreme & 6" Extreme Random Orbital Sander, with Hook Pad, Non Vac, Combo Kit 12,000 RPM, 3/16" Dia., Rear Exhaust
3M 81356, Venture Tape White Aluminum Foil Tape 1558HT, 72 mm a 45.7 m, 5.4 mil, 7010335933 