Conformable Tape with a Strong Hold
3M™ General Purpose Masking Tape 203 was designed to provide instant adhesion to a variety of surfaces. Its moderate adhesion supplies adequate holding power and helps resist lifting or curling. In addition, General Purpose Masking Tape 203 is conformable, maintaining integrity and seal when formed around corners and uneven surfaces. The crepe paper backing resists slivering and tears off the roll easily. With good paint hold-out and bleed-through resistance, this masking tape is ideal for many applications and removes cleanly from most substrates for up to 24 hours and has a temperature resistance of up to 200°F (93°C).
Recommended Applications
- MRO/Construction Painting
- Woodworking
- Entry level painting
- Appliance sealing and wrapping applications
What is Masking Tape?
Masking tape was developed specifically to help protect surrounding surfaces from overspray, provide clean paint lines, and remove easily and cleanly when finished. Masking tapes from 3M adhere well, resist solvents or water from the paint, and are strong enough to hang plastic sheeting, yet remove cleanly without damaging the subsurface. The backing, typically crepe paper, can conform to curved and irregular surfaces. The tape hand tears for tool-free application.

Dynabrade 78709 3/8" x 3/4"-B52 Dynacut A/O Mounted Point, Vitrified, 5/pack
Dynabrade 51347 3" (51 mm) Dia. Locking-Type Disc Pad, Medium Density, 3/8"-24 Thread
Dynabrade 79149 1/2" W x 24" L 80 Grit Ceramic DynaCut Belts, 50/pack
Dynabrade 54629 Rear Bearing Plate
Dynabrade Nitro Series 50209 Polisher Kit, w/ RB3 Buffer
Dynabrade 52986 3/8" Drill, .4 HP, Rear Exhaust, 500 RPM
Dynabrade 02108 Housing for Model 51411 - 3,200 RPM
Dynabrade 56107 6" Dia. Non-Vacuum Disc Pad, Vinyl-Face
Dynabrade 78305 1-1/2" Dia. x 1" W x 1/4" Shank, 80 Grit, A/O DynaCut Flap Wheel, 10/pack
Dynabrade 95541 Grease Gun
Dynabrade 43489 Housing, Extension Die Grinder, 3"
Dynabrade 78571 1-1/2" Dia. x 8-32 Female Center Thread, 60 Grit, A/O, 3-Ply, J-DynaCut Eyelet Star, 50/pack
Dynabrade 53680 Rotor
Dynabrade 51078 Bearing
Dynabrade 45296 Drop-In Motor
Dynabrade 79688 8" 150 Grit, Extreme Orange Hook & Loop Disc w/8 Vac Holes, 25 per Box
Dynabrade 55522 .3 hp Straight-Line, 3" Extended Die Grinder, Aluminum Housing 25,000 RPM, Rear Exhaust, 1/4" Collet
Dynabrade 79033 1/2" W x 18" L 120 Grit A/Z DynaCut Belt, 50/pack
Dynabrade 90224 1/4" W x 18" L 180 Grit A/O DynaCut Belt, 50/pack
Dynabrade 78694 D22 Cartridge Roll Mandrel 1/4" Pilot Dia. x 1-1/2" Pilot Length, 1/4" Dia. Shank x 1-1/4" Shank Length
Dynabrade 56195 5" Dia. Non-Vacuum Disc Pad, Hook-Face, Short Nap
Dynabrade 11008 Idler Arm
Dynabrade 32014 Filter Cage (for models 61204 and 614205)
Dynabrade 92245 - 4" (102 mm) Dia. x 3/4" (19 mm) W Bent Coarse Wire Wheel
Dynabrade 98263 3/8" NPT Male Plug
Dynabrade 79009 1/4" W x 12" L 120 Grit A/Z DynaCut Belt, 50/pack
3M 26022, PPS Series 2.0 Adapter, Type S12, 10 mm Male, 1.0 mm Thread, 7100135943 