When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.
Delivers Non-sag Formulation so Adhesive Stays Where Applied
This unique acrylic gives you the strong shear and peel strength along with good impact resistance for durability to meet your demanding end-use applications. Making work safer, faster, and more efficient, that’s just a few of the benefits of 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS. It bonds on a variety of substrates ranging from metals, composite and many plastics including nylon. The non-sag formula creates rigid adhesion. The acrylic adhesive cures to a tan or black color.
Recommended Applications
- Sporting goods (metal to metal, metal to plastic bonding)
- Appliance manufacturing (metal to metal, metal to glass)
- Electronic casing assembly
10 Minute Work Life and 20 Minute Handling Strength
With a mix ratio is 1:1, 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS provides a 10 minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C). (Note: excess adhesive exposed to air around the bond lines may remain tacky up to 48 hrs.) 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810NS is approved under UL 746C, polymeric materials use in electrical equipment.
Easy Adhesion with Acrylic
Acrylic adhesives, often referred to as epoxy adhesives or epoxy glue, are two-part adhesives that provide excellent bond strength and durability, although slightly lower adhesion than 2 part epoxy in some situations. However, acrylic glues have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a moderate shelf life.

3M 95725, Venture Tape Metal Building Facing Tape 1552CW, White, 72 mm x 45.7 m, 7010313505
Norton 66623335427, 2" Dia Vortex Rapid Prep Quick-Change Non-Woven Abrasive Disc, Medium Grade, 50 Each
3M 41594, Polyurethane Sealant 540, Gray, 310 mL Cartridge, 7000000942, 12/Case
3M™ 07010, Supplied Air Respirator Hose W-9435-25/07010(AAD), 25 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005374, 1 EA/Case
3M 08017, Marine Grade Silicone Sealant, White, 3 oz Tube, 7000120479, 6/Case
3M 86992, Diamond Disc, 3" Roloc, 674W, 120 Mesh, TR, 7100143477, Box of 5
3M 20931, PSA Cloth Disc 348D, P100 X-weight, 1 in x NH, Die 100N, 7000118915
3M 62617, Scotch-Weld Threadlocker TL90, Green, 250 mL Bottle, 7100039235, 2/case
3M 16583, Accuspray Atomizing Head, Green, 1.3 mm, 7010309279
Dynabrade 64404 36" W x 60" L (914 mm W x 1,524 mm L) Metal Capture Downdraft Table, 230 V (AC), Side Exhaust
Dynabrade 51740 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet, with Mount Stem
Dynabrade 51700 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
Dynabrade 14360 Pneumatic Pipe Belt Finisher
ACS Diamond Cloth Belt, CX1250 1/2" X 18" 125U
3M 62604, Scotch-Weld Threadlocker TL42, Blue, 1 mL Pipette, 7100064043, 100/case
Dynabrade 95821 Dynabrade Air Lube 10W/NR, 4oz Bottle
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
Norton 69936606277 - 4" X 5/8" - 11, Carbon Steel Narrow Face Stringer Bead .0200" Knot Wire Wheel Brush, 5 per box
Norton 66254497067 - 2" X 1/4" 100 - 150 Grit Medium Grade Aluminum Oxide Vortex Rapid Blend Blue TR Non-Woven Abrasive Disc, 25 Each
3M 94717, Cubitron ll Cloth Belt 947A, 80+ X-weight, 1 in x 30 in, Fabri-lok, Single-flex, 7010294445, 200 per case
3M 53920, Performance Plus Duct Tape 8979, Slate Blue, 12 in x 60 yd, 12.1 mil, 7000124267
3M 20907, PSA Cloth Disc 348D, P120 X-weight, 2 in x NH, Die 200P, 7000118875
Dynabrade 60051 .1 hp Straight-Line Quick-Change Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
3M 39187, General Trim Adhesive, 19 oz Net Wt, 7010328464, 4 per case
3M 76750, Roloc Disc 777F, 60 YF-weight, TS, 2 in, Die RS200P, 7010299188
Standard Abrasives 713638, Cartridge RoII Mandrel, 3/32 in x 3/4 in x 1/8 in x 1 in x 2-3/4 in CM-2B, 7010294964
3M 08368, Urethane Seam Sealer, White, 310mL Cartridge, 7100049325, 12 per case
Standard Abrasives 715081, A/O Straight Cartridge Roll, 5/8 in x 2 in x 3/16 in 60, 7100102991
3M 19079, E-A-R TaperFit 2 Probed Test Plugs 393-2006-50, 50 EA/Case, 7000002388
3M 71361, 641WY 1/4" X 24", 1200 Mesh Diamond Cloth Belt, 7010534916
3M 62602, Scotch-Weld Threadlocker TL22, Purple, 50 mL Bottle, 7100039159, 10/case 
