-
×
Dynabrade 11320 Contact Arm Ass'y, 5/8" Dia. x 3/8" W, Rubber Wheel, Offset to Prevent Gouging
1 × $75.13 -
×
Dynabrade 91546 5" Dynacut Extreme Orange Premium Film Disc, 100 Grit, Hook & Loop, Non-Vacuum, 50/Box
1 × $38.37 -
×
Dynabrade 93166 4" Dia. X 1/4" Dia. Shank, 80 Grit, A/O, Spindle-Mount Sanding Star
1 × $36.38 -
×
Dynabrade 94820 - 3/8" ID, 5' Long Air Hose Assembly, Female/ Male Fitting Ends Included
1 × $54.62 -
×
Dynabrade 78706 2" x 1/4"-20 Female Center Thread, Coarse, Dynabrite Surface Conditioning Eyelet Star, 50/pack
50 × $4.05 -
×
Dynabrade 43491 0.4 hp Short Block, Ext. Die Grinder
1 × $450.62 -
×
Dynabrade 51925 Air Motor Cylinder
1 × $190.70 -
×
Dynabrade 11129 3/4" W x 7" L Thin Platen Pad 5-Pkg.
1 × $41.82 -
×
Insize 1179-300WL, WIRELESS DIGITAL RTJ RING GROOVE CALIPER, 10-300mm/0.4-12", 0.01mm/0.0005", 6940561961010
1 × $619.53
-
×
Dynabrade 11135 - 1/2" (13 mm) x 2" (51 mm) Hard Platen Pad
1 × $4.95
-
×
Dynabrade 01185 Vane Set (4pk)
1 × $26.54 -
×
Dynabrade 40611 Electric Dynafile II Abrasive Belt Tool Versatility Kit
1 × $573.00 -
×
Dynabrade 48337 .4 hp 7 Degree Offset Die Grinder, Rear Exhaust, 30,000 RPM, 1/4" Collet
1 × $487.00 -
×
Dynabrade Dynacut 94021, 10-piece, Alloy Specific Burr Kit (for Nickel & Titanium), 1/8" Shank
1 × $173.12 -
×
Dynabrade 57348 Gear
1 × $59.16
-
×
Dynabrade 13504 Dynastraight Finishing Tool, 1 HP, Rear Exhaust, 3,400 RPM, 5/8"-11 Threaded Arbor
1 × $1,000.00 -
×
Dynabrade 57285 Housing for model 56818, 12,000 RPM
1 × $107.62
-
×
Dynabrade 11518 Rubber Drive Wheel
1 × $123.26 -
×
Dynabrade 11078 Contact Wheel Ass'y, 5/8" Dia. x 3/8" W x 3/8" I.D., Crown Face, 70 Duro Rubber
1 × $36.60 -
×
Dynabrade 52721 Cone or Plug 6" (152 mm) Extension Wheel Grinder, 18,000 RPM, 3/8"-24 Male Thread Spindle
1 × $755.00 -
×
Dynabrade 18426 Vane Set (4pk)
1 × $20.20 -
×
Dynabrade 51078 Bearing
1 × $29.53 -
×
Dynabrade 10690 Filter/Regulator/Lubricator, FRL40, 1/2" NPTAssy.
1 × $388.51
Dynabrade 78769 3″ Dia. x 2″ W x 1/4″ Shank, Fine, NWN DynaBrite Wheel, 10/pack
$16.77
3″ Dia. x 2″ W x 1/4″ Shank, Fine, NWN DynaBrite Wheel, 12,000 RPM Max, 10/pack
Abrasive Specifications
Mfr. Part # 78769
| Abrasive Category | Non Woven Abrasives |
|---|---|
| Abrasive Diameter [inches] | 3″ |
| Abrasive Mineral Type | AO |
| Abrasive Shape | Wheels |
| Diameter [inches] | 3″ |
| Abrasive Sub Shape | Flap Wheel |
| Abrasive Width [inches] | 2″ |
| CE Certified | No |
| EAC Certified | No |
| Height [inches] | 0.0 |
| Length [inches] | 0.0 |
| Weight [pounds] | 0.0 |
| Width [inches] | 2.0 |
| Abrasive Backing Material | Woven Cloth |
| Abrasive Sub Shape 2 | 1/4″ Shank |
| Abrasive Tier | Good |
| Case Qty | 1.0 |
| EAN (UPC) Code | 0616026783157 |
| GL_Minimum Order Quantity | 1.0 |
| Quantity Each Pack | 10 |
| Abrasive Grit / Grade | Fine |
| Type | Non-Woven Nylon |
Related products
