- Micron graded abrasives are slurry coated to polyester film for fine finishes. Use when a mirror finish is required.
- For use on Dynabrade’s Superfinisher to achieve predictable, consistent and repeatable finishes on a variety of materials.
Abrasive Specifications
Mfr. Part # 92759
| Abrasive Category | Coated Abrasives |
|---|---|
| Abrasive Mineral Type | AO |
| Abrasive Shape | Roll |
| Abrasive Length [inches] | 150 ft |
| Abrasive Sub Shape | Lapping Film |
| Abrasive Width [inches] | 3 In. |
| CE Certified | No |
| EAC Certified | No |
| Height [inches] | 0.0 |
| Length [inches] | 1800.0 |
| Weight [pounds] | 0.0 |
| Width [inches] | 3.0 |
| Micron | 3.0 |
| Abrasive Backing Material | Film |
| Abrasive Tier | Better |
| EAN (UPC) Code | 0616026927247 |
| Quantity Each Pack | 1 |
| Abrasive Grit / Grade | 3 Micron |
| Type | Coated |

Dynabrade 11477 Dynabelter Abrasive Belt Tool, Heavy-Duty
Dynabrade 11684 Dynabelter Contact Arm Assembly 4" DIA X 5/8" W., 40 Duro Serrated
Dynabrade 78182 3" Dia. Medium DynaBrite Locking-Type Disc, 25/pack
Dynabrade 14000 Dynafile Abrasive Belt Tool
Dynabrade 95544 Gear Grease, 2.5oz. Tube
Dynabrade 11476 Dynabelter Abrasive Belt Tool, Heavy-Duty
Dynabrade 64404 36" W x 60" L (914 mm W x 1,524 mm L) Metal Capture Downdraft Table, 230 V (AC), Side Exhaust
Dynabrade 95821 Dynabrade Air Lube 10W/NR, 4oz Bottle
Dynabrade 95842 Dynabrade Air Lube 10W/NR, 1 Pint
Dynabrade 64350 26" W x 36" L (660 mm W x 914 mm L) Metal Capture Downdraft Station, 230 V (AC)
ACS CX1250 Diamond Belt, 1/2" X 24" 175u
Norton 66623335427, 2" Dia Vortex Rapid Prep Quick-Change Non-Woven Abrasive Disc, Medium Grade, 50 Each
Dynabrade 53533 Cone or Plug Grinder (Triple Extension)
3M 34550, Cubitron II Net Sheet Roll, 80+, 80 mm x 10 m, 7100283781, 6 Rolls/Case
Dynabrade 14010 Dynafile Abrasive Belt Tool Versatility Kit
Dynabrade 53270 7" (180 mm) Dia. Right-Angle Disc Sander
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
Dynabrade 14360 Pneumatic Pipe Belt Finisher
Dynabrade 51301 .5 hp Straight-Line Die Grinder 
