- Micron graded abrasives are slurry coated to polyester film for fine finishes. Use when a mirror finish is required.
- For use on Dynabrade’s Superfinisher to achieve predictable, consistent and repeatable finishes on a variety of materials.
Abrasive Specifications
Mfr. Part # 92757
| Abrasive Category | Coated Abrasives |
|---|---|
| Abrasive Mineral Type | AO |
| Abrasive Shape | Roll |
| Abrasive Length [inches] | 150 ft |
| Abrasive Sub Shape | Lapping Film |
| Abrasive Width [inches] | 3 In. |
| CE Certified | No |
| EAC Certified | No |
| Height [inches] | 0.0 |
| Length [inches] | 1800.0 |
| Weight [pounds] | 0.0 |
| Width [inches] | 3.0 |
| Micron | 15.0 |
| Abrasive Backing Material | Film |
| Abrasive Tier | Better |
| EAN (UPC) Code | 0616026927247 |
| Quantity Each Pack | 1 |
| Abrasive Grit / Grade | 15 Micron |
| Type | Coated |

3M 42728, Impact Stripping Tape 500, Green, 12 in x 10 yd, 36 mil, 1 Roll/Case, 7010373675
3M 5681, Disc Pad Holder 915, 5 in x 1/8 in x 3/8 in M14-2.0 Internal, 7000028500
Dynabrade 64002 SuperFinisher, 230 Volts (AC), 1 Phase, 50 Hz
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
3M 13627, 947, Hookit Disc Pad Holder, 7 in x 1 in x 5/8 in 5/8-11 Internal, 7000028353
Dynabrade 92186 1" W x 30" L 60 Grit A/Z DynaCut Belt, 50/pack
Dynabrade 91165 1/2" W x 13" L 60 Grit A/O DynaCut Belt, 50/pack
Dynabrade 11475 Dynabelter Abrasive Belt Tool, Standard Duty
Dynabrade 14360 Pneumatic Pipe Belt Finisher
Dynabrade 95544 Gear Grease, 2.5oz. Tube
Dynabrade 14000 Dynafile Abrasive Belt Tool
Dynabrade 11684 Dynabelter Contact Arm Assembly 4" DIA X 5/8" W., 40 Duro Serrated
Norton 66261199696 - 3" X 1/4" X 1/4" Vortex Rapid Blend Unified Wheel, 7AM U2305, 40 Each
Dynabrade 64404 36" W x 60" L (914 mm W x 1,524 mm L) Metal Capture Downdraft Table, 230 V (AC), Side Exhaust 
