-
×
3M 76632, Roloc Disc 777F, 50 YF-weight, TR, 3 in, Die R300V, 7000045628
200 × $1.48 -
×
3M 26016, PPS Series 2.0 Adapter, Type S9, 16 mm Male, 1.5 mm Thread, 7100135330
4 × $25.96 -
×
Dynabrade 14360 Pneumatic Pipe Belt Finisher
1 × $1,598.86 -
×
Norton 66623325035 - 2" 120 Grit Fine Grade Aluminum Oxide Vortex Rapid Prep Green TR Non-Woven Surface Preparation Disc, 50 Each
50 × $1.76 -
×
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
400 × $1.50 -
×
Dynabrade 92210 1/8" W x 12" L 320 Grit A/O DynaCut Belt, 50/pack
50 × $0.95 -
×
Dynabrade 92151 1/2" W x 18" L 120 Grit Ceramic DynaCut Scalloped Edge Belt, 50/pack
50 × $4.35 -
×
Dynabrade 92118 1/4" W x 12" L 180 Grit A/O DynaCut Belt, 50/pack
50 × $1.07
-
×
Dynabrade 78583 1/4" Dia. x 1-1/2" W x 1/8" Center Hole, 60 Grit, 100/pack
100 × $0.54 -
×
3M 33443, Cubitron II File Belt, 36+, 1/2 in x 18 in (12.7 mm x 457.2 mm), 7100033184, 10 belts per carton, 5 cartons per case
100 × $33.94 -
×
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
200 × $1.33 -
×
3M 07053, General Purpose Sanding Sponge CP-040NA, Single Angle, 2-7/8 in x 4-7/8 in x 1 in, Fine, 7100110752
24 × $3.21 -
×
3M 07054, General Purpose Sanding Sponge CP041-12-CC, Single Angle, 2-7/8 in x 4-7/8 in x 1 in, Medium, 7100101246
12 × $3.21 -
×
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113
1 × $0.86 -
×
3M 22404, Roloc Disc 361F, 80 YF-weight, TR, 3 in, Die R300V, 7000045100
200 × $1.33 -
×
Norton 66261013403 - 3" X 1/2" Extra Coarse Grade Silicon Carbide Bear-Tex Rapid Strip TR Stripping Disc, 10 Each
10 × $8.36 -
×
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
2 × $1,925.99 -
×
3M™ 37018, Supplied Air Respirator Vortex Cooling Assembly V-100/37018(AAD), 70070799013, 1 EA/Case
1 × $397.07 -
×
3M 54371, Particulate Respirator 8577, P95, with Nuisance Level, Organic Vapor Relief, 7000002062, 80 EA/Case
1 × $419.14 -
×
3M 11412, Roloc Disc 361F, 36 YF-weight, TR, 1 in, Die R100N, 7000045092
500 × $0.60 -
×
Norton 66261014897 2" x 1/4" Bear-Tex NEX Rapid Blend AO Medium Grit TR (Type III) Non-Woven Wheel, 60 Each
60 × $4.62 -
×
Norton 66254497067 - 2" X 1/4" 100 - 150 Grit Medium Grade Aluminum Oxide Vortex Rapid Blend Blue TR Non-Woven Abrasive Disc, 25 Each
25 × $4.68 -
×
3M 02090, Trizact Hookit Blending Disc 443A, 6 in, P1000 grade, 7000000539, 15 discs per carton
4 × $117.94 -
×
3M 19765, Utility Cloth Sheet 314D, 9 in x 11 in P280 J-weight, 7000000353
250 × $1.37 -
×
Dynabrade 78176 2" Dia. Medium NWN VT DynaBrite TR Locking-Type Disc, 25/pack
25 × $1.84 -
×
3M 01332, PSA Cloth Disc 348D, 80 X-weight, 3 in x NH, Die 300V, 7000118881
200 × $0.90 -
×
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
200 × $0.97 -
×
3M 13171, Scotch-Brite Multi-Finishing Wheel, MU-WL, 2S Medium, 6 in x 1 in x 1 in, 7000136469
3 × $50.65 -
×
Dynabrade 91425 1/4" W x 12" L 60 Grit A/O DynaCut Belt, 50/pack
50 × $1.07
-
×
3M 95412, Lead Foil Tape 420, Dark Silver, 3/4 in x 36 yd, 6.8 mil, 7000029006
12 × $103.27 -
×
Dynabrade 78193 2" Dia. x 80 Grit A/O DynaCut Locking-Type Disc, 2 Ply Cloth, 25/pack
25 × $0.87
3M 76742, Roloc Disc 777F, 36 YF-weight, TS, 2 in, Die RS200P, 7010328291
$1.19
Factory Stock, 7-10 Day Leadtime
3M Roloc Disc 777F features 3M-engineered high-performing ceramic abrasive grain blended with aluminum oxide for a combination of durability and cutting efficiency that increases productivity for both stock removal and finishing. The heavy, water-resistant polyester backing supports medium-pressure applications, a consistent cut-rate, and both wet and dry applications.
Our 3M Roloc Disc 777F is resin-bonded to withstand high heat and pressure. A grinding aid on the 777F disc reduces grinding temperatures to protect heat-sensitive alloys such as stainless steel and nickel alloys.
3M Ceramic Abrasive Grain is a ceramic mineral designed to enhance toughness and hardness of the grain. For increased performance, 3M Roloc Disc 777F products feature aluminum oxide mineral blended with 3M Ceramic Abrasive Grain which is one of the hardest, longest-lasting minerals available. Perfect for moderate to heavy stock removal, ceramic abrasives are engineered to cut fast and handle intense heat and stress applications. Ceramic aluminum oxide blends surpass aluminum oxide abrasives in cut-rate and durability making them an excellent choice for difficult grinding applications.
3M Roloc Disc 777F is available for use with the following Roloc attachment systems: TSM, TR, TP and TS. Please select discs with the attachment design made for your system.
