-
×
Dynabrade 96575 2 Gal Portable Wet Tank Assy
1 × $104.31 -
×
Dynabrade 95529 O-Ring
1 × $2.07 -
×
Dynabrade 78323 2" Dia. x 1" W x 1/4" Shank, 80 Grit, A/O DynaCut Flap Wheel, 10/pack
10 × $16.56 -
×
Dynabrade 56250 5" Dia. Vacuum Disc Pad, Hook-Face, Short Nap
1 × $31.38 -
×
Dynabrade 53050 Drill Chuck Key for 53030
1 × $15.42
-
×
Dynabrade 18553 Handle Assy., 14mm
1 × $50.37 -
×
Dynabrade 01488 Housing- At very least RPM is needed
1 × $109.36 -
×
Dynabrade 10298 Belt Position Wheel
1 × $83.35
-
×
Dynabrade 64350 26" W x 36" L (660 mm W x 914 mm L) Metal Capture Downdraft Station, 230 V (AC)
1 × $18,352.22 -
×
Dynabrade 47211 .4 hp 7 Degree Offset Die Grinder, Rear Exhaust, 3,200 RPM, 1/4" Collet
1 × $701.00 -
×
Dynabrade 93907 3" Dia. Side Spoked Diamond Mounted Cut-Off Wheel
1 × $254.99 -
×
Dynabrade 52477 Gasket
1 × $21.73 -
×
Dynabrade 57404BKV 2-3/4" W x 8" L Dynaline Sander, Vacuum
1 × $5,561.00 -
×
Dynabrade 50126 3" Dia. Disc Backup Pad, 3/8"-24 Thread, Hook 'N Loop
1 × $21.85 -
×
Dynabrade 48365 .4 hp Straight-Line Die Grinder, Rear Exhaust, 20,000 RPM, 1/8" Collet
1 × $437.00 -
×
Dynabrade 11080 Contact Wheel Ass'y, 1" Dia. x 3/8" W x 3/8" I.D., Round Radiused Face, 70 Duro Rubber
1 × $36.49 -
×
Dynabrade 31013 Inside Wheel Flange
1 × $170.62
-
×
Dynabrade 15029 Contact Arm Ass'y, 1" Dia. x 3/8" W, Tapered Rubber Wheel, No Platen/Offset Design
1 × $100.69 -
×
Dynabrade 11604 1" W x 7" L Soft Platen Pad 5-Pkg.
1 × $50.50 -
×
Dynabrade 39011 Spacer Ring Set
1 × $117.14
-
×
Dynabrade 58410 8" Dia. Two-Hand Dynorbital Random Orbital Sander, Non-Vacuum
1 × $656.00 -
×
Dynabrade 56818 5" Dia. Self-Generated Vacuum Dynorbital Supreme Random Orbital Sander, 3/16" Orbit
1 × $284.00 -
×
Dynabrade 56803 3-1/2" Dia. Self-Generated Vacuum Dynorbital Supreme Random Orbital Sander, 3/16" Orbit
1 × $284.00 -
×
Dynabrade 54937 Lever, Throttle
1 × $62.61
Dynabrade 91326 11-1/4″ Dia. x 80 Micron A/O Hook “O”-style Vacuum Microfinishing Disc, 10/Box
$9.82
11-1/4″ Dia. x 80 Micron A/O Hook “O”-style Vacuum Microfinishing Disc, 10/Box
- The most common mineral used in a wide range of good, general purpose abrasive products for use primarily on softer materials. It lacks the hardness of some other abrasive minerals but delivers a dependable performance where high pressure/high heat applies
- Backsplash corners.
Abrasive Specifications
Mfr. Part # 91326
| Abrasive Category | Coated Abrasives |
|---|---|
| Abrasive Diameter [inches] | 11-1/4″ |
| Abrasive Mineral Type | AO |
| Abrasive Shape | Discs |
| Diameter [inches] | 11-1/4″ |
| Abrasive Sub Shape | Hook and Loop |
| CE Certified | No |
| EAC Certified | No |
| Height [inches] | 0.0 |
| Length [inches] | 0.0 |
| Weight [pounds] | 0.0 |
| Width [inches] | 0.0 |
| Micron | 100.0 |
| Vacuum Type | Vacuum |
| Abrasive Backing Material | Film |
| Abrasive Sub Shape 2 | Vacuum |
| Abrasive Sub Shape 3 | Film |
| Abrasive Tier | Better |
| Case Qty | 10.0 |
| EAN (UPC) Code | 0616026913257 |
| Quantity Each Pack | 10 |
| Abrasive Grit / Grade | 80 |
| Type | Coated |
Related products
