-
×
3M 17227, Heavy Duty Duct Tape DT11, Silver, 48 mm x 54.8 m, 11 mil, 7100158346
24 × $12.90 -
×
Standard Abrasives 78510, Ceramic Pro Type 27 Flap Disc, 645104, 4-1/2 in x 5/8-11 60 Y-weight, 7010369539, 10 per case
10 × $9.26 -
×
Standard Abrasives 78529, Ceramic Pro Type 29 Flap Disc, 645141, 7 in x 5/8-11 80 Y-weight, 7010331466
10 × $17.89 -
×
Standard Abrasives 547003, Adapter, 5/8"-11 Male x 3/8"-24 Female, 7010368726
1 × $10.22 -
×
3M™ 53797, Flexible Diamond Belt 6451J, 1/2" Dia x 18" L, M125 Micron, Type G, Pattern B2, 7010509272
6 × $43.00 -
×
3M 26132, PPS Series 2.0 Adapter, Type S37, 5/8 Male, 11 UNC Modified, 7100135949
1 × $25.96 -
×
Dynabrade 14000 Dynafile Abrasive Belt Tool
1 × $734.00 -
×
3M 72600, 663FC 1/2" X 30", 70u Diamond Trizact Belt, 7100206529
1 × $0.00 -
×
3M 77197, Scotch-Brite™ Roloc™ Deburr and Finish PRO Unitized Wheel,TR, 3 in x 1/8 in x NH, 8C CRS+, 7100109130, 40/box
40 × $11.06 -
×
3M 09413, Scotch-Brite Contour Surface Paint and Varnish Remover 9413NA, 7000052005
10 × $5.79 -
×
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
250 × $4.14 -
×
Standard Abrasives 78509, Ceramic Pro Type 27 Flap Disc, 645103, 4-1/2 in x 5/8-11 40 Y-weight, 7010310618, 10 per case
10 × $9.26 -
×
Standard Abrasives 78523, Ceramic Pro Type 29 Flap Disc, 645129, 4-1/2 in x 5/8-11 80 Y-weight, 7010310620, 10 per case
10 × $8.09 -
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
200 × $1.39 -
×
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
200 × $1.33
Dynabrade 92594 3-1/2″ Dia. x 30 Micron A/O Non-Vacuum Hook-Face Scalloped-Edge DynaCut Disc, 50/Box
$2.40
3-1/2″ Dia. x 30 Micron A/O Non-Vacuum Hook-Face Scalloped-Edge DynaCut Disc, 50/Box
- The most common mineral used in a wide range of good, general purpose abrasive products for use primarily on softer materials. It lacks the hardness of some other abrasive minerals but delivers a dependable performance where high pressure/high heat applies
- Backsplash corners.
Abrasive Specifications
Mfr. Part # 92594
| Abrasive Category | Coated Abrasives |
|---|---|
| Abrasive Diameter [inches] | 5″ |
| Abrasive Mineral Type | AO |
| Abrasive Shape | Discs |
| Diameter [inches] | 5″ |
| Abrasive Sub Shape | Hook and Loop |
| CE Certified | No |
| EAC Certified | No |
| Height [inches] | 0.0 |
| Length [inches] | 0.0 |
| Weight [pounds] | 0.0 |
| Width [inches] | 0.0 |
| Micron | 30.0 |
| Vacuum Type | Non-Vacuum |
| Abrasive Backing Material | Film |
| Abrasive Sub Shape 2 | Non-Vacuum |
| Abrasive Sub Shape 3 | Film |
| Abrasive Tier | Better |
| EAN (UPC) Code | 0616026925946 |
| Quantity Each Pack | 50 |
| Abrasive Grit / Grade | 30 Micron |
| Type | Coated |
Related products
Dynabelter Contact Arms
Dynabrade 11684 Dynabelter Contact Arm Assembly 4″ DIA X 5/8″ W., 40 Duro Serrated
$438.51