-
×
3M 05043, Cloth Belt 384F, 80+ XF-weight, 1/2 in x 12 in, Fabri-lok, Full-flex, 7100141435, 200 per case
200 × $1.15 -
×
3M 93623, Steel Mesh Viso V4G-10P 10 ea/Case, 7000103815
1 × $159.55 -
×
Dynabrade 51731 .1 hp Straight-Line Pencil Grinder, 60,000 RPM, 1/8" Collet
1 × $634.00 -
×
3M 19076, E-A-R Classic Probed Test Plugs 393-2003-50, 50 EA/Case, 7000052882
1 × $101.11
-
×
Dynabrade 95843 Dynabrade Air Lube 10W/NR, 1 Gallon
1 × $109.23 -
×
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
1 × $2,225.47 -
×
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
200 × $1.33 -
×
Insize 3293-061, CAN SEAM MICROMETER, 0-.5", for steel cans, 6928640328497
1 × $140.37
-
×
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
250 × $4.14 -
×
3M 26583, Accuspray Refill Pack for PPS Series 2.0, Green, 1.3 mm, 7100152953
5 × $10.20 -
×
Dynabrade 14360 Pneumatic Pipe Belt Finisher
1 × $1,679.00 -
×
Insize 4102-236, STEEL GAGE BLOCK SET, 36pcs, grade AS-2, 6928640329883
1 × $314.53
-
×
3M 02960, Scotch-Brite Cut and Polish Wheel, CP-WL, 5A Fine, 6 in x 1 in x 1 in, 7100009186, Box of 3
1 × $132.29 -
×
3M 35124, Grippy Sanding Cloth Trial Kit, 7100230957
10 × $6.84 -
×
3M 33349, 641WY 1/4" X 24", 220 Mesh Diamond Cloth Belt, 7010534919
15 × $9.52 -
×
Dynabrade 51860 1.0 hp Trim Router (Complete), 20,000 RPM, 1/4 Collet
1 × $910.00 -
×
3M 27359, Cloth Belt 970DZ, 24 YN-weight, 25 in x 75 in, Film-lok, Single-flex, 7010361224, 2 per case
2 × $206.61 -
×
ACS CX1250 Diamond Belt, 1/2" X 24" 60u
12 × $7.60 -
×
Dynabrade 53270 7" (180 mm) Dia. Right-Angle Disc Sander
1 × $1,585.00 -
×
3M 71361, 641WY 1/4" X 24", 1200 Mesh Diamond Cloth Belt, 7010534916
18 × $9.52 -
×
Standard Abrasive 78548, Ceramic Pro Type 29 High Density Flap Disc, 645183, 4 1/2 in x 7/8 40 Y-weight, 7010292440
10 × $8.63
3M 88600, Pro-Pak Wetordry Sanding Sheets 88600NA, 9 in x 11 in, 180C grit, 7000126434, 25 sheet per pack
$19.56
Factory Stock, 7-10 Day Leadtime, Priced Per Pack
3M Wetordry allows you to sand between coats of varnish and paint or other finishes. Can be used with water to reduce clogging and extend abrasive life. Ideal for sanding metal for repainting or prior to primer coat.
3M Pro pak Wet or Dry abrasives are specially designed for wet or dry sanding. Use 3M Imperial Wetordry Sandpaper for a premiere finish on lacquers, primers, sealers, plastics and paints. For final or between coats sanding.
