-
×
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
200 × $1.74 -
×
3M 21543, Scotch-Brite Roloc Clean and Strip XT Pro Extra Cut Disc, TR, 2 in x NH, A XCS, 7100179815, 60/box
1 × $4.57 -
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
200 × $1.39 -
×
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113
1 × $0.86 -
×
3M 86745, Diamond Disc, 2" Roloc, 674W, 120 Mesh, TR, 7100022116, Box of 10
20 × $24.25 -
×
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
600 × $1.50 -
×
3M 11137, Roloc Disc 361F, 50 YF-weight, TR, 1-1/2 in, Die R150S, 7000045094
500 × $0.73
-
×
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
200 × $1.61 -
×
3M 05043, Cloth Belt 384F, 80+ XF-weight, 1/2 in x 12 in, Fabri-lok, Full-flex, 7100141435, 200 per case
200 × $1.15 -
×
3M 05526, Wetordry Sponge Pad 20, 5-1/2 x 2-3/4 in x 3/8 in, 7000045663
50 × $6.21 -
×
3M 66630, Cloth Belt 341D, 50 X-weight, 6 in x 48 in, Film-lok, Single-flex, 7000118864, 20 per case
20 × $11.98 -
×
3M 03051, Sanding and Finishing Disc Holder, 03051ES, 2 inch, 7010364781
12 × $4.17 -
×
3M 34556, Cubitron II Net Sheet Roll, 320+, 80 mm x 10 m, 7100283765, 6 Rolls/Case, (Previously Item# 7100247340)
6 × $28.94 -
×
Standard Abrasives 722809, PSA A/O Extra Disc, 5 in x NH, 60, 7010368721
50 × $1.22 -
×
3M 28719, Wheel Adapter Kit 28719, 1 in x 5/8-11 Internal, 7100050705
1 × $50.70 -
×
3M 22405, Roloc Disc 361F, P100 YF-weight, TR, 3 in, Die R300V, 7000045102
200 × $1.25 -
×
3M 34566, Cubitron II Net Sheet Roll, 240+, 70 mm x 10 m, 7100247511, 6 Rolls/Case
6 × $26.89 -
×
3M 36877, Self-Stick Liquid Protection Fabric, Blue, 6 in x 300 ft per Roll, 7100169347, 4 Rolls Per Pack
1 × $534.40 -
×
Standard Abrasives 713066, PSA A/O Disc, 8 in x NH, 60, 7010370082
10 × $2.48 -
×
3M 88871, PSA Cloth Disc 777F, 60 YF-weight, 12 in x NH, Die 1200B, 7000120238
10 × $15.13
3M 09317, Regalite Floor Surfacing Rolls, 12 in x 50 yd, 752I, 40 Grit, 7010384135
$360.86
Factory Stock, 7-10 Day Leadtime
3M Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite mineral and tough paper backing.
3M Floor Surfacing Rolls are recommended for general drum sanding. They are especially good for removing gummy finishes. This abrasive cuts fast.
