-
×
Dynabrade 52675 1 hp Straight-Line 6" (152 mm) Extension Die Grinder, Rear Exhaust, 9,000 RPM, 1/4" Collet
1 × $765.00 -
×
Dynabrade 13445 Housing Assembly for 13403, 4,500 RPM
1 × $407.30 -
×
Dynabrade 58977 Housing Assy for Model # 59023 Rev. H
1 × $102.45
-
×
Insize 4812-E, THREAD GAGE, 1-10TPI, 6928640319334
1 × $30.86
-
×
Dynabrade 48370 .4 hp Straight-Line Die Grinder, Rear Exhaust, 25,000 RPM, 1/8" Collet
1 × $437.00 -
×
Dynabrade 82445 6" Dia. x 120 Grit A/O Hook Non-Vacuum Film-Backed DynaCut Disc, 100/Box
100 × $1.62 -
×
Dynabrade 91438 1/2" W x 24" L 80 Grit A/O DynaCut Belt, 50/pack
50 × $1.44 -
×
Dynabrade 07182 Adapter
1 × $125.00
-
×
Dynabrade 82428 5" Dia. x 80 Grit A/O Hook Non-Vacuum Film-Backed DynaCut Disc, 100/Box
100 × $1.21
-
×
Dynabrade 55622 Throttle Vavle Assembly
1 × $45.47
-
×
Dynabrade 55031 Felt Seal
1 × $10.83 -
×
Dynabrade 01495 1/8" (.125) Capacity Collet Sleeve
1 × $37.50 -
×
Dynabrade 51684 Muffler
1 × $5.49 -
×
Dynabrade 45296 Drop-In Motor
1 × $570.20 -
×
Dynabrade 53981 - 6" (152 mm) Dia. Conversion Pad, Vinyl-to-Hook
1 × $10.83
-
×
Dynabrade 95149 Spring
1 × $5.95
-
×
Dynabrade 56759 .7 hp Straight-Line Die Grinder, Central Vacuum, 15,000 RPM, 1/4" Collet
1 × $624.00 -
×
Dynabrade 59500 - 6" Spirit Drop-In Motor, 3/8" Orbit Type "H"
1 × $145.95
-
×
Dynabrade 79818 3" 150 Grit Dynacut Extreme Orange Film Non Vac Hook Face Disc, 50 per box
1 × $35.37 -
×
Dynabrade 01199 Air Motor
1 × $588.90 -
×
Dynabrade 92191 2" W x 30" L 60 Grit A/Z DynaCut Belt, 10/pack
10 × $6.48 -
×
Dynabrade 51372 Seal, Front Exhaust
1 × $6.78
-
×
Dynabrade 93597 3/4" Dia. x 3/8", 3-48 Female Center Thread, 60 Grit A/O, 8 Ply, J-DynaCut Cross Pad, 100/pack
1 × $128.00 -
×
Dynabrade 56469 Exhaust Gasket
1 × $7.28 -
×
Dynabrade 57804 3-2/3" W x 7" L Dynabug Orbital Sander, Central Vac-Ready, .24 HP, 8,000 RPM, 3/16" Orbit
1 × $577.00 -
×
Dynabrade 96526 Drill Chuck- 3/8" Keyless
1 × $75.54 -
×
Dynabrade 96044 Motor Tune-Up Kit
1 × $160.05
3M 76624, Roloc Disc 777F, 60 YF-weight, TR, 1 in, Die R100N, 7000045620
$0.68
Factory Stock, 7-10 Day Leadtime
3M Roloc Disc 777F features 3M-engineered high-performing ceramic abrasive grain blended with aluminum oxide for a combination of durability and cutting efficiency that increases productivity for both stock removal and finishing. The heavy, water-resistant polyester backing supports medium-pressure applications, a consistent cut-rate, and both wet and dry applications.
Our 3M Roloc Disc 777F is resin-bonded to withstand high heat and pressure. A grinding aid on the 777F disc reduces grinding temperatures to protect heat-sensitive alloys such as stainless steel and nickel alloys.
3M Ceramic Abrasive Grain is a ceramic mineral designed to enhance toughness and hardness of the grain. For increased performance, 3M Roloc Disc 777F products feature aluminum oxide mineral blended with 3M Ceramic Abrasive Grain which is one of the hardest, longest-lasting minerals available. Perfect for moderate to heavy stock removal, ceramic abrasives are engineered to cut fast and handle intense heat and stress applications. Ceramic aluminum oxide blends surpass aluminum oxide abrasives in cut-rate and durability making them an excellent choice for difficult grinding applications.
3M Roloc Disc 777F is available for use with the following Roloc attachment systems: TSM, TR, TP and TS. Please select discs with the attachment design made for your system.
