-
×
3M 34576, Cubitron II Net Sheet Roll, 220+, 115 mm x 10 m, 7100247509, 6 Rolls/Case
6 × $47.94 -
×
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
250 × $4.14 -
×
3M 34567, Cubitron II Net Sheet Roll, 320+, 70 mm x 10 m, 7100247338, 6 Rolls/Case
6 × $26.89 -
×
3M 26404, Cloth Belt 341D, 50 X-weight, 2-1/2 in x 60 in, Film-lok, Single-flex, 7010361743, 50 per case
100 × $5.72 -
×
Standard Abrasives 700743, Cartridge RoII Mandrel, 1/8 in x 3/4 in x 1/8 in x 1 in x 2-3/4 in CM-4, 7010368728
5 × $4.32 -
×
Dynabrade 14010 Dynafile Abrasive Belt Tool Versatility Kit
1 × $871.15 -
×
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091
500 × $0.75 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,186.90 -
×
3M 05519, Sanding Block, Rubber, 2-3/4 in x 5 in, 7000000587
10 × $18.37 -
×
3M 36878, Self-Stick Liquid Protection Fabric, Blue, 14 in x 300 ft, 7100169505
1 × $311.73 -
×
3M 05744, Hookit Hand File Board, 2-3/4 in x 16 in, 7000045717
1 × $73.94 -
×
3M 17228, Heavy Duty Duct Tape DT11, Black, 48 mm x 54.8 m, 11 mil, 7100158377
24 × $12.90 -
×
3M 34554, Cubitron II Net Sheet Roll, 220+, 80 mm x 10 m, 7100247496, 6 Rolls/Case
6 × $31.57 -
×
3M 27490, 641WY, 3" X 30", 1200 Mesh, Diamond Cloth Belts, 7010508907
1 × $142.63 -
×
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
200 × $1.74
3M 09314, Regalite Floor Surfacing Rolls, 8 in x 50 yd, 752I, P100 Grit, 7010384134
$142.60
Factory Stock, 7-10 Day Leadtime
3M Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite mineral and tough paper backing.
3M Floor Surfacing Rolls are recommended for general drum sanding. They are especially good for removing gummy finishes. This abrasive cuts fast.
