-
×
Dynabrade 96101 Dynabrade Air Lube 10W/NR 24 Per Box
3 × $367.21 -
×
Dynabrade 95843 Dynabrade Air Lube 10W/NR, 1 Gallon
3 × $104.07 -
×
3M 15913, Scotch-Brite Roloc Disc High Strength, TR, 2 in X NH A Medium, 7000000710
400 × $1.72 -
×
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113
1 × $0.86 -
×
ACS Flap Disc, Type 29 (Curved) Full Diamond 4-1/2 X 5/8-11 60M, 333.FD4.5-60/T29
1 × $52.00 -
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
200 × $1.39 -
×
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
240 × $8.38 -
×
3M 14593, Scotch-Brite Cut and Polish Disc, 3" x 1-1/4" x 1/4" A Medium, D5, 7000045941, Box of 10
20 × $16.71 -
×
3M 86745, Diamond Disc, 2" Roloc, 674W, 120 Mesh, TR, 7100022116, Box of 10
10 × $24.25 -
×
Dynabrade 10690 Filter/Regulator/Lubricator, FRL40, 1/2" NPTAssy.
1 × $370.16 -
×
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
400 × $1.74 -
×
Dynabrade 11477 Dynabelter Abrasive Belt Tool, Heavy-Duty
1 × $2,583.72 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,186.90 -
×
3M 01326, PSA Cloth Disc 348D, P240 X-weight, 3 in x NH, Die 300V, 7000045069
200 × $0.95 -
×
3M 01328, PSA Cloth Disc 348D, P180 X-weight, 3 in x NH, Die 300V, 7000045068
200 × $0.95 -
×
Dynabrade 95842 Dynabrade Air Lube 10W/NR, 1 Pint
1 × $24.56 -
×
3M 30702, Cloth Belt 577F, 50 YF-weight, 2 in x 132 in, Film-lok, Single-flex, 7010363104, 50 per case
50 × $12.36
3M 09310, Regalite Floor Surfacing Rolls, 8 in x 50 yd, 752I, 40 Grit, 7010384132
$229.48
Factory Stock, 7-10 Day Leadtime
3M Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite mineral and tough paper backing.
3M Floor Surfacing Rolls are recommended for general drum sanding. They are especially good for removing gummy finishes. This abrasive cuts fast.
