-
×
3M™ 94275, Versaflo™ Gold Coated Tinted Over-Visor with UV/IR Protection M-967N, 70071696879, 1 EA/Case
1 × $192.76 -
×
Dynabrade 51731 .1 hp Straight-Line Pencil Grinder, 60,000 RPM, 1/8" Collet
1 × $634.00 -
×
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
1 × $2,022.00 -
×
ACS CX1250 Diamond Belt, 1/2" X 24" 74u
12 × $7.60 -
×
Insize 7341-15S, PIN GAGE HANDLE (with 1pc handle and 8 pairs of collecting bushes), .760-1.010", 6928640396847
1 × $125.64 -
×
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
200 × $1.61 -
×
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
240 × $8.38 -
×
3M 06524, Scotch Steel Gray Masking Paper, 06524, 24 in x 1000 ft, 1 per case, 7000045442
1 × $176.19 -
×
Dynabrade 51700 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
1 × $558.00 -
×
3M™ 72016, Remote Alarm & Strobe 529-05-20, Audible, 7000131708, 1 EA/Case
1 × $502.78 -
×
Standard Abrasives 725001, Buff and Blend Cross Buff GP, A/O Medium, 1-1/2 in x 1/2 in x 3 Ply x 8-32, 7010330368
50 × $3.14 -
×
Dynabrade 40610 Electric Dynafile II Abrasive Belt Tool
1 × $420.00 -
×
3M™ 72013, Adapter 529-04-50, 110-120 VAC, 7000131705, 1 EA/Case
1 × $129.94 -
×
3M 22405, Roloc Disc 361F, P100 YF-weight, TR, 3 in, Die R300V, 7000045102
200 × $1.25 -
×
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113
1 × $0.86 -
×
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
200 × $1.50 -
×
3M 29836, Sanding Screen, 60 Grit, 18 in x NH, 7100160820
12 × $11.06 -
×
Dynabrade 78583 1/4" Dia. x 1-1/2" W x 1/8" Center Hole, 60 Grit, 100/pack
100 × $0.58 -
×
3M 77408, Cloth Belt 777F, 50 YF-weight, 1/2 in x 24 in, Fabri-lok, Single-flex, 7000118438, 200 per case
200 × $2.66
3M 09310, Regalite Floor Surfacing Rolls, 8 in x 50 yd, 752I, 40 Grit, 7010384132
$229.48
Factory Stock, 7-10 Day Leadtime
3M Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite mineral and tough paper backing.
3M Floor Surfacing Rolls are recommended for general drum sanding. They are especially good for removing gummy finishes. This abrasive cuts fast.
