-
×
Standard Abrasives 78510, Ceramic Pro Type 27 Flap Disc, 645104, 4-1/2 in x 5/8-11 60 Y-weight, 7010369539, 10 per case
10 × $9.26 -
×
3M 19677, Scotch-Seal Industrial Sealant 800, Reddish Brown, 1 Gallon Drum, 7000000793, 4/Case
4 × $251.59 -
×
Standard Abrasives 78531, Ceramic Pro Type 29 Flap Disc, 645146, 7 in x 7/8 60 Y-weight, 7010310621, 5 per case
5 × $12.78 -
×
3M 08368, Urethane Seam Sealer, White, 310mL Cartridge, 7100049325, 12 per case
12 × $26.40 -
×
3M 05440, Stikit Hand Block, Hard 2-3/4 in x 5 in, 7000045764
10 × $26.95 -
×
Standard Abrasives 853299, Quick Change TR S/C Unitized Wheel, 532, 2 in x 1/4 in, 7010294934
10 × $5.34 -
×
3M 16553, Scotch-Brite Extra Duty Hand Pad 6444, 6 in x 9 in, 7000028548, 60/Case
1 × $100.58 -
×
Standard Abrasives 713638, Cartridge RoII Mandrel, 3/32 in x 3/4 in x 1/8 in x 1 in x 2-3/4 in CM-2B, 7010294964
5 × $4.32 -
×
3M 03016, Glass Cloth Tape 361, White, 3/4 in x 60 yd, 6.4 mil, 7000047441
48 × $89.62 -
×
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
200 × $1.50 -
×
ACS 1/2 in x 18 in Diamond Metal Bond Belt, 120M/125u
1 × $30.00 -
×
Dynabrade 45209 Sleeve for 48201, 25,000 RPM
1 × $43.44 -
×
Dynabrade 93708 1-1/2" Dia. x 1/2", 8-32 Female Center Thread, 240 Grit A/O, 8 Ply, J-DynaCut Cross Pad, 100/pack
100 × $1.28 -
×
ACS Diamond Cloth Belt, CX1250 3" X 30" 125U
2 × $57.10 -
×
3M 20927, PSA Cloth Disc 348D, P240 X-weight, 1 in x NH, Die 100N, 7000118918
500 × $0.39 -
×
3M 20928, PSA Cloth Disc 348D, P180 X-weight, 1 in x NH, Die 100N, 7000118917
500 × $0.40 -
×
3M 76623, Roloc Disc 777F, 50 YF-weight, TR, 1 in, Die R100N, 7000045619
500 × $0.65 -
×
3M 34556, Cubitron II Net Sheet Roll, 320+, 80 mm x 10 m, 7100283765, 6 Rolls/Case
6 × $28.94 -
×
3M 76624, Roloc Disc 777F, 60 YF-weight, TR, 1 in, Die R100N, 7000045620
1000 × $0.62 -
×
3M 94717, Cubitron ll Cloth Belt 947A, 80+ X-weight, 1 in x 30 in, Fabri-lok, Single-flex, 7010294445, 200 per case
200 × $3.73 -
×
3M 84158, Microfinishing PSA Film Disc 366L, 30 Mic 3MIL, Type D, 5 in x NH, Die 500X, 7010360217, 500 per case
500 × $0.88 -
×
3M™ 53797, Flexible Diamond Belt 6451J, 1/2" Dia x 18" L, M125 Micron, Type G, Pattern B2, 7010509272
3 × $43.00 -
×
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
1 × $2,225.47 -
×
3M 47408, 663FC 1" X 30", 70u Diamond Trizact Belts, 7010509031
1 × $159.76 -
×
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
1 × $33.40
3M 28795, Finesse-it Polish Standard Series, 28795, 120, Purple, 8 oz, 4 ea/Case, 7010361136
$13.34
Factory Stock, 7-10 Day Leadtime
3M Finesse-it Polish – Purple is part of a line of specially designed compounds and polishes to be used on OEM and baked refinish paints to remove sand scratches or to remove swirl marks from previously compounded areas and is designed to produce best results when used with an air or electric buffer equipped with 3M Finesse-it buffing pads.
3M™ Finesse-it™ Polish – Purple works well for buffing wood, automotive OEM, marine, and aerospace coatings.
This material also produces superior results in top coat rubbing and other woodworking applications requiring satin, semi-gloss, and high gloss finishes. This same material can also be used in our Finesse-it™ Trizact™ Paint Repair System for AOEM paint and clear coats. Finish results are dependent on the combination of coating type, polish, and tools used.
3M™ Finesse-it™ products are a line of specially engineered abrasives, compounds, polishes, and buffing pads to be used on OEM and baked refinish paints to remove defects, sand scratches, or swirl marks on a variety of painted surfaces. 3M Finesse-it products are an integral part of a 3M recommended buffing system for repairing surface defects to clear coats, lacquered wood, solid surfaces, gelcoat, powder coat, industrial paint, acrylic, and glass.
Related products
