The 3M Particulate Cartridge 2076HF Hydrogen Fluoride, P95, with Nuisance Level Acid Gas Relief helps provide respiratory protection in environments containing hydrogen fluoride and certain oil and non-oil based particles. The cartridge/filter combination is effective for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces. The filter also offers nuisance level odor relief from acid gases that are below the PEL. Nuisance level refers to concentrations not exceeding OSHA PEL or other applicable government exposure limits, whichever is lower. Do not use for respiratory protection against acid gases in environments that are immediately dangerous to life or health (IDLH). Inventory needs and training requirements of safety equipment are reduced because this filter works for many different applications. This filter is commonly used in the following industries: aluminum processing, chemicals and oil and gas.
The cartridge/filter combination works with a wide range of facepieces, including 3M Half and Full Facepieces 6000, 7000 and FF-400 Series. If used with 3M Adapter 502, the filter may also be used with 3M Respirator 5000 Series or 3M Cartridge 6000 Series. If used with the 3M Scott AV-632 Bayonet Adapter, the filter may be used with the 3M Scott AV-3000 HT and AV-3000 SureSeal facepieces. The cartridge is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing hydrogen fluoride and certain oil and non-oil based particles. The filter has been assigned the color code ?Olive? in the NIOSH system. Passing NIOSH?s P-series test criteria, the 2076HF P95 filter provides at least 95 percent filter efficiency against particles.
Breathing hazardous particles or hydrogen fluoride gas can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M Particulate Cartridge 2076HF to help reduce exposure to certain particles and hydrogen fluoride.

Dynabrade 51301 .5 hp Straight-Line Die Grinder
3M 27710, Cubitron II Roloc Durable Edge Disc 984F, 60+, YF-weight, TR, Maroon, 3 in, Die R300V, 7000045172, 200 per case
Norton 66623303912 - 2" Dia. XCS Grit Aluminum Oxide Type III, Bear-Tex Non-Woven Quick-Change Disc, 25 Each
3M™ 07012, Supplied Air Hose W-9435-100/07012(AAD), 100 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005375, 1 EA/Case
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
ACS 2" Diamond Disc, 60 Mesh, W/ Metal Button
Dynabrade 95848 Dynabrade Gear Oil
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
Dynabrade 55520 .3hp, Straight-Line Die Grinder, 25,000 RPM, Aluminum Housing, Rear Exhaust, 1/4" Collet
Dynabrade 55523 .3 hp Straight-Line, 6" Extended Die Grinder, Aluminum Housing 25,000 RPM, Rear Exhaust, 1/4" Collet
3M 01383, Stikit Gold Film Disc Roll Dust Free, 6 in, P80, 7010298823, 100 discs per roll
3M™ 37018, Supplied Air Respirator Vortex Cooling Assembly V-100/37018(AAD), 70070799013, 1 EA/Case
3M 57545, Dry Layup Adhesive 2.0 W7900, color-change technology, 416g, aerosol, 7100062697, 12 Canisters/Case
Dynabrade 61420 Raptor Vac Electric Portable Vacuum System
3M™ 17323, Versaflo™ Respiratory Helmet Assembly M-407, with Premium Visor and Flame Resistant Shroud, 7000002395, 1 EA/Case
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
Insize ISF-S100-U, DIGITAL SPRING TESTERS, 22lbf, 6940561961331
3M 87449 Silver Depressed Center Grinding Wheel, T27 Quick Change, 9 in x 1/4 in x 5/8-11 Center Hub Thread, 7010409732, 20 per case
3M™ 07011, Supplied Air Respirator Hose W-9435-50/07011(AAD), 7000005373, 1 EA/Case
3M 22404, Roloc Disc 361F, 80 YF-weight, TR, 3 in, Die R300V, 7000045100
3M 33349, 641WY 1/4" X 24", 220 Mesh Diamond Cloth Belt, 7010534919
3M™ 72013, Adapter 529-04-50, 110-120 VAC, 7000131705, 1 EA/Case
Dynabrade 53270 7" (180 mm) Dia. Right-Angle Disc Sander
3M 77197, Scotch-Brite™ Roloc™ Deburr and Finish PRO Unitized Wheel,TR, 3 in x 1/8 in x NH, 8C CRS+, 7100109130, 40/box
3M 37004, Nose Cup Assembly 6894/37004(AAD), Replacement Part, 7000002034, 5 EA/Case 