The X-Series earmuffs are 3M?s latest advancement in hearing conservation. New technologies in comfort, design and protection all come together in this groundbreaking earmuff line. The X1A is a lightweight, low-profile earmuff designed for protection against low-level industrial noise and other loud sounds. It features an electrically insulated wire headband, often referred to as ?dielectric?.
– The wire headband offers consistent pressure over prolonged wearing periods
– Earcup pivot points tilt for optimum comfort and efficiency
– Replaceable ear cushions and foam liners (hygiene kit HYX1)
– Noise Reduction Rating (NRR)b 22 dB. CSA Class A
NOTE: The X-Series (over-the-head) headband version is electrically insulated -sometimes referred to as ?dielectric?. The metal components of the headband have been covered by non-conductive material for use in a low voltage electrical hazard (less than 440 V ac). As there are no applicable standards for testing ear muffs against electrical insulating properties, the product has been evaluated at an external laboratory against a modified test method based on EN397:1995. During assessment, the leakage current did not exceed 1.2mA when the external surface of the product made contact with an electrical source. The user must determine the overall suitability of this product for the intended application taking into account any hazards other than noise for which this product is tested.
*The NRR may overestimate the hearing protection provided during typical use. 3M recommends reducing the NRR by 50% for estimating the amount of noise reduction provided.
Hearing Protection Solutions Made Innovatively Easy.

3M 70894, 641WY 1/2" X 24", 100 Mesh Diamond Cloth Belt, 7010533228
3M 76631, Roloc Disc 777F, TR, 3 in x NH, 36 YF-weight, 7000028339
3M 71878, Flexible Diamond Hand File 6210J, Yellow 18, N40, NO 1, 7000082156, 10 per case
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
3M 20360, Scotch-Weld Epoxy Adhesive 2216, Gray, Part B, 5 Gallon Drum (Pail), 7000046360
Dynabrade 40610 Electric Dynafile II Abrasive Belt Tool
3M 02590, Stikit Gold Sheet Roll, P400, 2-3/4 in x 45 yd, 7000028254
3M 62818, Adhesive Sealant 760 UV, Black, 600 mL Sausage Pack, 7000121496, 12/Case
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
3M 05530, Stikit Soft Hand Pad, 2-3/4 in x 5-1/2 in x 3/8 in, 7000028351
3M™ 17323, Versaflo™ Respiratory Helmet Assembly M-407, with Premium Visor and Flame Resistant Shroud, 7000002395, 1 EA/Case
3M 65033, Scotch-Brite Diamond Wheel, 645DC 6 in x 1/2 in x 1 in, 7010365574, Box of 3
3M 62813, Adhesive Sealant 740 UV, Gray, 290 mL Cartridge, 7100111087, 12 per case
ACS CX1250 Diamond Belts, 1/2" X 24" 45u
3M 01333, PSA Cloth Disc 348D, 60 X-weight, 3 in x NH, Die 300V, 7000118880
3M™ 07011, Supplied Air Respirator Hose W-9435-50/07011(AAD), 7000005373, 1 EA/Case
Dynabrade 51731 .1 hp Straight-Line Pencil Grinder, 60,000 RPM, 1/8" Collet
3M 16580, Accuspray ONE Spray Gun System with Standard PPS, 7100099202
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
3M 45699, Cubitron II Hookit Cloth Disc 947A, 40+ X-weight, 3 in x NH, Die 300V, 7100113114
3M 05742, Hookit Soft Hand Block, 2-3/4 x 5 in, 7000045436
3M 20911, PSA Cloth Disc 348D, 50 X-weight, 2 in x NH, Die 200P, 7000118871
3M™ 07010, Supplied Air Respirator Hose W-9435-25/07010(AAD), 25 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005374, 1 EA/Case 
