-
×
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
500 × $0.67 -
×
3M™ 07010, Supplied Air Respirator Hose W-9435-25/07010(AAD), 25 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005374, 1 EA/Case
1 × $175.93 -
×
3M™ 17323, Versaflo™ Respiratory Helmet Assembly M-407, with Premium Visor and Flame Resistant Shroud, 7000002395, 1 EA/Case
1 × $746.76 -
×
3M 14502 Scotch-Brite Surface Conditioning Belt, 3/8 in x 13 in, A MED, 7100103026
20 × $3.56 -
×
3M 69067, Trizact Cloth Belt 307EA, A30 JE-weight, 2 in x 72 in, Film-lok, Full-flex, 7010365015, 50 per case
50 × $11.35 -
×
3M™ 17379, Versaflo™ Length Adjusting Breathing Tube BT-30, 7100009685, 1 EA/Case
1 × $80.58 -
×
3M 20365, Scotch-Weld Epoxy Adhesive 2216, Gray, Part A, 5 Gallon Drum (Pail), 7000046361
5 × $508.22 -
×
Dynabrade 51750 .1 hp Straight-Line Extension Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
1 × $603.00 -
×
3M 76733, Cloth Belt 777F, 80 YF-weight, 6 in x 48 in, Film-lok, Single-flex, 7000118454, 20 per case
20 × $30.30 -
×
3M 26584, Accuspray Refill Pack for PPS Series 2.0, Orange, 1.4 mm, 7100152954
5 × $6.63 -
×
3M 20908, PSA Cloth Disc 348D, P100 X-weight, 2 in x NH, Die 200P, 7000118874
200 × $0.74 -
×
3M 20856, Scotch-Weld Epoxy Adhesive 2216, Translucent, Part B/A, 1 Gallon Kit, 7000046480, 2/case
2 × $948.90 -
×
3M Dirt Trap Protection Material Applicator, 36865, Floor Model, 1 per case
1 × $297.13 -
×
Dynabrade 90872 2" Dia. Coarse NWN DynaBrite Locking-Type Disc, 25/pack
25 × $1.89 -
×
Dynabrade 11476 Dynabelter Abrasive Belt Tool, Heavy-Duty
1 × $1,721.00 -
×
3M™ 72122, Portable Compressed Air Filter and Regulator Panel 256-02-01, 100 cfm, 8 outlets, with Carbon Monoxide Monitor, 7000052147, 1 EA/Case
1 × $6,424.71
3M 67050, E-A-R One Touch Pro Adapter Plate 391-0010, 7100077665
$38.18
Factory Stock, 7-10 Day Leadtime
The 3M One Touch Pro adapter mounting backplate allows the dispenser to be wall hung using the same mounting hole locations as other dispensers on the market, such as the Howard Leight LS 500
3M One Touch?Pro Adapter Plate gives workplaces the option to switch out another dispenser, and use the same mounting hole locations when replacing it with the?3M One Touch Pro Dispenser. This accessory eliminates the need to drill new holes to mount the?3M One Touch Pro dispenser. It should be noted that this plate is not needed to wall mount a?3M One Touch Pro Dispenser in a new location, only where it is replacing an existing dispenser with a different hole configuration.
