-
×
3M™ 07010, Supplied Air Respirator Hose W-9435-25/07010(AAD), 25 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005374, 1 EA/Case
1 × $175.93 -
×
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
200 × $1.50 -
×
3M™ 17379, Versaflo™ Length Adjusting Breathing Tube BT-30, 7100009685, 1 EA/Case
2 × $80.58 -
×
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
1 × $500.06 -
×
3M™ 94275, Versaflo™ Gold Coated Tinted Over-Visor with UV/IR Protection M-967N, 70071696879, 1 EA/Case
1 × $192.76 -
×
3M 62611, Scotch-Weld Threadlocker TL62, Red, 250 mL Bottle, 7100039195, 2/case
2 × $100.85 -
×
3M™ 17323, Versaflo™ Respiratory Helmet Assembly M-407, with Premium Visor and Flame Resistant Shroud, 7000002395, 1 EA/Case
2 × $746.76 -
×
3M Dirt Trap Protection Material Applicator, 36865, Floor Model, 1 per case
1 × $297.13 -
×
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
1 × $33.40 -
×
3M 01334, PSA Cloth Disc 348D, 50 X-weight, 3 in x NH, Die 300V, 7000118879
200 × $0.97 -
×
3M 01335, PSA Cloth Disc 348D, 40 X-weight, 3 in x NH, Die 300V, 7000118878
200 × $1.01 -
×
3M 06953, Scotch Filament Tape Hand Dispenser H12, 1 in, 6/Case, 7000005393
6 × $36.76 -
×
3M™ 72122, Portable Compressed Air Filter and Regulator Panel 256-02-01, 100 cfm, 8 outlets, with Carbon Monoxide Monitor, 7000052147, 1 EA/Case
2 × $6,424.71 -
×
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
500 × $0.67 -
×
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
1 × $2,225.47 -
×
3M 77197, Scotch-Brite™ Roloc™ Deburr and Finish PRO Unitized Wheel,TR, 3 in x 1/8 in x NH, 8C CRS+, 7100109130, 40/box
40 × $11.06
3M 67050, E-A-R One Touch Pro Adapter Plate 391-0010, 7100077665
$38.18
Factory Stock, 7-10 Day Leadtime
The 3M One Touch Pro adapter mounting backplate allows the dispenser to be wall hung using the same mounting hole locations as other dispensers on the market, such as the Howard Leight LS 500
3M One Touch?Pro Adapter Plate gives workplaces the option to switch out another dispenser, and use the same mounting hole locations when replacing it with the?3M One Touch Pro Dispenser. This accessory eliminates the need to drill new holes to mount the?3M One Touch Pro dispenser. It should be noted that this plate is not needed to wall mount a?3M One Touch Pro Dispenser in a new location, only where it is replacing an existing dispenser with a different hole configuration.
Related products
