-
×
Dynabrade 50789 Shroud 3_ Vac. Coated Abrasive Disc Sander
1 × $74.54 -
×
Dynabrade 50147 - 4" (102 mm) Dia. Disc Pad, Hook 'N Loop
1 × $21.99 -
×
Dynabrade 76024 - 6" (152 mm) Dia. Non-Vacuum Soft Hook-Face Thick Random Orbital Sanding Pad
1 × $27.80 -
×
Dynabrade 92913 1-1/2" Dia. x 1" W Slotted Wheel
1 × $70.66 -
×
Dynabrade 56235 8" Dia. Vacuum Disc Pad, Vinyl-Face
1 × $40.95 -
×
Dynabrade 78699 D9-6 Cartridge Roll Mandrel 1/8" Pilot Dia. x 1" Pilot Length, 1/4" Dia. Shank x 6" Shank Length
1 × $19.80 -
×
Dynabrade 93344 Carbide Burr, 1/8" Dia., SF-42 D/C Burr, Tree, 1/2" Flute L, 1/8" Shank
1 × $15.84 -
×
Dynabrade 90673 1/2" W x 30" L 120 Grit A/O DynaCut Belt, 50/pack
50 × $1.35 -
×
Dynabrade 31945 - 2" to 1-1/4" Conductive Vacuum Hose Reduction Assembly
1 × $66.12
-
×
Dynabrade 96044 Motor Tune-Up Kit
1 × $152.49 -
×
Dynabrade 57852 - 3-2/3" (93 mm) W x 7" (178 mm) L Non-Vacuum Dynabug Disc Pad, Hook-Face, Long Nap
1 × $35.53
-
×
Dynabrade 21485 ND3217, Upper Motor Bearing Plate
1 × $60.77 -
×
3M 02593, Stikit Gold Sheet Roll, P240, 2-3/4 in x 45 yd, 7000028244
10 × $62.51 -
×
Dynabrade 18615 Label for Model # 51510, 2,500 RPM
1 × $12.08
-
×
Dynabrade 48370 .4 hp Straight-Line Die Grinder, Rear Exhaust, 25,000 RPM, 1/8" Collet
1 × $415.47 -
×
Dynabrade 13205 Dynastraight Finishing Tool, .7 HP, Rear Exhaust, 3,400 RPM, 5/8" or 1" Dia. Arbor
1 × $836.17 -
×
Dynabrade 54793 4" (102 mm) Dia. Extended Right Angle Type 27 Depressed Center Wheel Grinder, Steel Housing, .7 HP, 13,500 RPM, 3/8"-24 Spindle
1 × $1,186.90 -
×
Dynabrade 52856 .1 hp Extension Pencil Grinder, 60,000 RPM, 3mm Collet
1 × $719.84 -
×
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
1 × $33.40
3M 94537, SecureFit Full Brim Hard Hat H-805SFV-UV, Red Vented, 4-Point Pressure Diffusion Ratchet Suspension, with Uvicator, 20ea/Case, 7100240024
$329.61
Factory Stock, 7-10 Day Leadtime
Help give your workers an excellent blend of comfort, style and safety with 3M SecureFit Hard Hat Series.? Available in cap style or full brim models, the suspension system incorporates patented Pressure Diffusion Technology and sits low on the head for greater comfort and security.? Select models feature a proprietary indicator that lets wearer know when to replace helmet due to UV exposure.? All models meet ANSI Z89.1 Safety Compliance Standards.
The 3M SecureFit H-Series Hard Hats provides 3M innovation in comfort while maintaining the traditional cap and full brim design that many prefer. If you wear a hard hat for a full shift, you want it to be comfortable and fit properly. 3M recognizes this and has responded by designing a suspension system that self-adjusts to the wearer as the ratchet is tightened. Chosen 9 times out of 10 over current conventional hard hats*, this suspension system flexes and self-adjusts to the size of the wearer?s head, reducing forehead pressure and increasing comfort for all-day wear. Footnote: **End-user survey conducted by 3M, November 2020 ? March 2021. Participants were allowed to keep the new 3M hard hat.
