-
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,245.00 -
×
Dynabrade 90368 3/4" W x 34" L 80 Grit A/O DynaCut Belt, 50/pack
50 × $2.55 -
×
Dynabrade 79004 1/8" W x 12" L 80 Grit A/Z DynaCut Belt, 50/pack
50 × $1.24 -
×
Dynabrade 92115 1/2" W x 12" L 220 Grit A/O DynaCut Belt, 50/pack
50 × $1.29 -
×
Dynabrade 51301 .5 hp Straight-Line Die Grinder
1 × $453.00 -
×
Dynabrade 55204 Vane Set (4pk)
1 × $39.08 -
×
Dynabrade 94467 DynaJet In-Line Blow Gun
1 × $35.86 -
×
Dynabrade 90407 1/8" W x 24" L 80 Grit A/O DynaCut Belt, 50/pack
50 × $0.85 -
×
Dynabrade 56355 3" x 4-1/4" Non-Vacuum Dynabug II Pad, Vinyl-Face
1 × $32.01 -
×
Dynabrade 55404 Vanes, 4/Set, Vaned Pencil Grinder
1 × $39.08 -
×
Dynabrade 59339 Vacuum Cuff, 1", w/Groove
1 × $13.53 -
×
Dynabrade 52474 Vane Set (4pk)
1 × $34.27 -
×
Dynabrade 59380 Rotor/Vane Set
2 × $71.27 -
×
Dynabrade 40320 Dynafile II Abrasive Belt Tool
1 × $722.00 -
×
Dynabrade 90211 1/8" W x 18" L 60 Grit A/O DynaCut Belt, 50/pack
50 × $1.10 -
×
Dynabrade 50010 Collet, 3/8"-24 Female Thread, 1/4" Capacity, 3-Piece Collet
1 × $83.35 -
×
Dynabrade 98580 Motor Tune-Up Kit for National Detroit Sander Models
2 × $130.00 -
×
Dynabrade 92153 1/2" W x 12" L 80 Grit Ceramic DynaCut Scalloped Edge Belt, 50/pack
50 × $3.90 -
×
Dynabrade 92114 1/2" W x 12" L 180 Grit A/O DynaCut Belt, 50/pack
50 × $1.29
-
×
Dynabrade 90614 3" W x 10-11/16" L 80 Grit A/O DynaCut Belt, 10/pack
10 × $3.71 -
×
Dynabrade 93252 8" Dia. x 1/2" Center Hole, 400 Grit, A/O, Arbor-Mount Sanding Star
2 × $22.82 -
×
3M 65875, Scotch Storage Packaging Tape 3650-2, 1.88 in x 54.6 yd (48 mm x 50 m),
2 pack - 6 packs/case, 7100115795
6 × $9.64
-
×
3M 79911, Scotch Long Lasting Storage Pkg Tape with dispenser 3650-RD-12GC, 1.88 in x 54.6 yd (48 mm x 50 m), Refillable Dispenser, 7100234261
12 × $5.70
-
×
Standard Abrasives 707034, A/O Straight Cartridge Roll, 3/8 in x 1 in x 1/8 in 180, 7100103130
101 × $0.38 -
×
Dynabrade 13505 Dynastraight Finishing Tool, 1 HP, Rear Exhaust, 3,400 RPM, 5/8"-11 Arbor
1 × $996.00 -
×
Dynabrade 96425 Screws For Vacuum Shroud (57737)
2 × $2.07 -
×
Dynabrade 78709 3/8" x 3/4"-B52 Dynacut A/O Mounted Point, Vitrified, 5/pack
5 × $1.57 -
×
Standard Abrasives 707434, A/O Straight Cartridge Roll, 1/4 in x 1 in x 1/8 in 320, 7100103091
100 × $0.36 -
×
Dynabrade 01011 Vane Set (4pk)
1 × $27.37
-
×
Dynabrade 90499 1/2" W x 34" L 120 Grit A/O DynaCut Belt, 50/pack
50 × $2.27 -
×
Dynabrade 93534 3" Mandrel for Sanding Stars, 3-48 Male Thread
1 × $9.90 -
×
Dynabrade 56323 3-7/8" x 5-5/8" Vacuum Dynabug II Disc Pad, Hook-Face, Short Nap
1 × $35.13 -
×
3M 53698, Scotch High Tack Box Sealing Tape 373+, Clear, 72 mm x 100 m, 24 Rolls/Case, 7100266181
24 × $15.94
-
×
Dynabrade 01794 Rubber Drive Wheel
1 × $299.83
3M 93622, Clear Acetate Visor V3F-10P 10 EA/Case, 7000103814
$215.06
Factory Stock, 7-10 Day Leadtime
Lightweight acetate visor helps provide face protection from splash and other debris. Snaps into P3EV/2 hard hat adaptor or 3M Peltor Cap-Mounted Ear Muffs.
Lightweight acetate visor helps provide reliable impact protection.
? Visor easily snaps into any Peltor earmuff bracket or the 3M Peltor Hard Hat Attachment Connector (P3EV/2)
? Nose cut-out section allows for increased ventilation
? Complies to high impact requirements of ANSI Z87.1-2010
? 10 visors/case
3M provides reliable head and face protection products that meet regulated performance and safety requirements. Protective eyewear should be worn under faceshields at all times. Protective eyewear sold separately.
Related products
