-
×
Dynabrade 64350 26" W x 36" L (660 mm W x 914 mm L) Metal Capture Downdraft Station, 230 V (AC)
1 × $18,352.22 -
×
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
500 × $0.67 -
×
Dynabrade 51301 .5 hp Straight-Line Die Grinder
2 × $453.00 -
×
Norton 69936606277 - 4" X 5/8" - 11, Carbon Steel Narrow Face Stringer Bead .0200" Knot Wire Wheel Brush, 5 per box
5 × $21.15 -
×
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
250 × $4.14 -
×
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
200 × $1.33 -
×
Standard Abrasives 713638, Cartridge RoII Mandrel, 3/32 in x 3/4 in x 1/8 in x 1 in x 2-3/4 in CM-2B, 7010294964
5 × $4.32 -
×
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
500 × $0.67 -
×
3M 03016, Glass Cloth Tape 361, White, 3/4 in x 60 yd, 6.4 mil, 7000047441
48 × $89.62 -
×
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
500 × $0.67 -
×
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
300 × $6.03 -
×
Standard Abrasives 725008, Buff and Blend Cross Buff HP, A/O Very Fine, 1 in x 3/8 in x 2 Ply x 8-32, 7000046829
50 × $3.13 -
×
3M 33066, Cloth Belt 341D, P100 X-weight, 25 in x 48 in, Sine-lok, Single-flex, 7010308084, 5 per case
5 × $49.00 -
×
3M 01328, PSA Cloth Disc 348D, P180 X-weight, 3 in x NH, Die 300V, 7000045068
200 × $0.95 -
×
3M™ 17379, Versaflo™ Length Adjusting Breathing Tube BT-30, 7100009685, 1 EA/Case
1 × $80.58 -
×
3M 30025, Pressure Sensitive Spray Adhesive 72, Blue, 24 fl oz Can (Net Wt 17.3 oz), 7000046588, 12/Case
12 × $22.51 -
×
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
200 × $0.97 -
×
3M 65033, Scotch-Brite Diamond Wheel, 645DC 6 in x 1/2 in x 1 in, 7010365574, Box of 3
1 × $531.70 -
×
Dynabrade 11684 Dynabelter Contact Arm Assembly 4" DIA X 5/8" W., 40 Duro Serrated
1 × $438.51 -
×
Insize 7341-12S, PIN GAGE HANDLE (with 1pc handle and 4 pairs of collecting bushes), .635-.704", 6928640360701
1 × $64.73 -
×
3M 77197, Scotch-Brite™ Roloc™ Deburr and Finish PRO Unitized Wheel,TR, 3 in x 1/8 in x NH, 8C CRS+, 7100109130, 40/box
40 × $11.06 -
×
ACS Diamond Cloth Belt, CX1250 3" X 30" 9U
2 × $57.10 -
×
3M 71361, 641WY 1/4" X 24", 1200 Mesh Diamond Cloth Belt, 7010534916
18 × $9.52
3M 43464, Molten Metal Neck Guard NC2-OR, Orange, 10 EA/Case, 7100296470
$432.00
Factory Stock, 7-10 Day Leadtime
3M Molten Metal Neck Guard NG2 GR is designed to protect against molten metal splash, radiant heat and flame hazards. It attaches to 3M and other hard hats using hook and loop fasteners on the inside of the shell. Internal attachments allow for use with or without earmuffs attached to the hard hat.
3M Molten Metal Neck Guard, NG2 GR, is designed to protect against molten metal splash, radiant heat and flame hazards. It attaches to 3M and other hard hats using hook and loop fasteners on the inside of the shell. The NC2 GR uses a streamlined design to provide protection against small splashes and spatter. Internal attachments allow for use with or without earmuffs attached to the hard hat.
