-
×
3M 51034, Roloc Disc 361F, P100 YF-weight, TSM, 2 in, Die RS200PM, 7000119020
200 × $0.97 -
×
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
1 × $2,022.00 -
×
3M 14895, Cloth Belt 777F, 80 YF-weight, 1 in x 42 in, Film-lok, Single-flex, 7010299926, 200 per case
200 × $4.46 -
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
500 × $0.60 -
×
3M 87270, Scotch-Weld Epoxy Adhesive DP105, Clear, 200 mL Duo-Pak, 7010309884, 12/case
12 × $99.40 -
×
Dynabrade 64350 26" W x 36" L (660 mm W x 914 mm L) Metal Capture Downdraft Station, 230 V (AC)
1 × $18,352.22 -
×
Standard Abrasives 32985, Aluminum Oxide Overlap Disc, 714721, 60 Grit, 2 in x 8-32 x 2 Ply, 7100116380
100 × $1.67 -
×
ACS CX1250 Diamond Belt, 1/2" X 24" 9u
12 × $7.60 -
×
Dynabrade 51301 .5 hp Straight-Line Die Grinder
1 × $453.00 -
×
3M 16200, PPS Disposable Lids, Standard and Large, 200 Micron Filter,
25 lids per case, 7000119740
1 × $42.32 -
×
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
1 × $500.06 -
×
3M 11137, Roloc Disc 361F, 50 YF-weight, TR, 1-1/2 in, Die R150S, 7000045094
1000 × $0.73 -
×
3M 66617, Cloth Belt 341D, 50 X-weight, 3 in x 24 in, Fabri-lok, Single-flex, 7000118857, 25 per case
25 × $3.44 -
×
3M 22409, Roloc Disc 361F, P120 XF-weight, TR, 1-1/2 in, Die R150S, 7000045103
1000 × $0.67 -
×
3M 53036, 663FC, 1/2" X 90", 20u, Diamond Trizact Belt 7100205970
1 × $0.00 -
×
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
1500 × $0.67 -
×
3M 01326, PSA Cloth Disc 348D, P240 X-weight, 3 in x NH, Die 300V, 7000045069
200 × $0.95 -
×
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
500 × $0.67 -
×
3M 29611, 641WY 1/4" X 24", 100 Mesh Diamond Cloth Belt, 7010534832
15 × $7.30
3M 43464, Molten Metal Neck Guard NC2-OR, Orange, 10 EA/Case, 7100296470
$432.00
Factory Stock, 7-10 Day Leadtime
3M Molten Metal Neck Guard NG2 GR is designed to protect against molten metal splash, radiant heat and flame hazards. It attaches to 3M and other hard hats using hook and loop fasteners on the inside of the shell. Internal attachments allow for use with or without earmuffs attached to the hard hat.
3M Molten Metal Neck Guard, NG2 GR, is designed to protect against molten metal splash, radiant heat and flame hazards. It attaches to 3M and other hard hats using hook and loop fasteners on the inside of the shell. The NC2 GR uses a streamlined design to provide protection against small splashes and spatter. Internal attachments allow for use with or without earmuffs attached to the hard hat.
