-
×
Standard Abrasives 722809, PSA A/O Extra Disc, 5 in x NH, 60, 7010368721
50 × $1.22 -
×
Dynabrade 95848 Dynabrade Gear Oil
2 × $12.98 -
×
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
200 × $1.33 -
×
Dynabrade 92116 1/2" W x 12" L 320 Grit A/O DynaCut Belt, 50/pack
50 × $1.29 -
×
3M 11418, Roloc Disc 361F, P240 XF-weight, TR, 3 in, Die R300V, 7000045106
200 × $1.25 -
×
ACS Diamond Cloth Belt, CX1250 3" X 30" 75U
2 × $57.10 -
×
3M 77197, Scotch-Brite™ Roloc™ Deburr and Finish PRO Unitized Wheel,TR, 3 in x 1/8 in x NH, 8C CRS+, 7100109130, 40/box
40 × $11.06 -
×
Dynabrade 51629 .1 hp Straight-Line Pencil Grinder, Central Vacuum, 1/8" Collet
1 × $603.00 -
×
3M 54343, Particulate Respirator 8511, N95, 7000002056, 80 EA/Case
1 × $191.59 -
×
3M™ 17379, Versaflo™ Length Adjusting Breathing Tube BT-30, 7100009685, 1 EA/Case
1 × $80.58 -
×
3M™ 72122, Portable Compressed Air Filter and Regulator Panel 256-02-01, 100 cfm, 8 outlets, with Carbon Monoxide Monitor, 7000052147, 1 EA/Case
1 × $6,424.71 -
×
ACS Diamond Cloth Belt, CX1250 3" X 30" 45U
2 × $57.10
-
×
3M 54143, Particulate Respirator 8233, N100, 7000002028, 20 ea/Case
1 × $203.63 -
×
Standard Abrasives 707195, Aluminum Oxide Handy Roll, P80 J-weight, 2 in x 50 yd, 7100031626
1 × $50.10 -
×
Dynabrade 51630 .1 hp Straight-Line Extension Pencil Grinder, Central Vacuum, 1/8" Collet
1 × $634.00 -
×
3M 19771, Utility Cloth Sheet 314D, 9 in x 11 in P100 J-weight, 7000021272
250 × $1.43 -
×
3M™ 72016, Remote Alarm & Strobe 529-05-20, Audible, 7000131708, 1 EA/Case
1 × $502.78 -
×
3M 87449 Silver Depressed Center Grinding Wheel, T27 Quick Change, 9 in x 1/4 in x 5/8-11 Center Hub Thread, 7010409732, 20 per case
20 × $12.65 -
×
3M 28830, 675L, 1/2" X 72", 74u, Diamond Microfinishing Film Belt 7010508919
6 × $29.15 -
×
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
1 × $500.06
3M 43464, Molten Metal Neck Guard NC2-OR, Orange, 10 EA/Case, 7100296470
$432.00
Factory Stock, 7-10 Day Leadtime
3M Molten Metal Neck Guard NG2 GR is designed to protect against molten metal splash, radiant heat and flame hazards. It attaches to 3M and other hard hats using hook and loop fasteners on the inside of the shell. Internal attachments allow for use with or without earmuffs attached to the hard hat.
3M Molten Metal Neck Guard, NG2 GR, is designed to protect against molten metal splash, radiant heat and flame hazards. It attaches to 3M and other hard hats using hook and loop fasteners on the inside of the shell. The NC2 GR uses a streamlined design to provide protection against small splashes and spatter. Internal attachments allow for use with or without earmuffs attached to the hard hat.
Related products
