-
×
3M 28625, DISC PAD FACE PLATE RIBBED 81732L, 5 IN EXTRA HARD RED, 7010362529
10 × $20.38 -
×
Standard Abrasives 78522, Ceramic Pro Type 29 Flap Disc, 645128, 4-1/2 in x 5/8-11 60 Y-weight, 7010369544, 10 per case
10 × $9.26 -
×
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
720 × $8.38 -
×
3M 14593, Scotch-Brite Cut and Polish Disc, 3" x 1-1/4" x 1/4" A Medium, D5, 7000045941, Box of 10
10 × $16.71 -
×
3M™ 72016, Remote Alarm & Strobe 529-05-20, Audible, 7000131708, 1 EA/Case
2 × $502.78 -
×
3M 41100, Cubitron II Cloth Belt 984F, 60+ YF-weight, 1/2 in x 12 in, Fabri-lok, Single-flex, 7010511304, 200 per case
200 × $2.98 -
×
3M 05777, Hookit Soft Interface Pad, 6 x 1/2 x 3/4 inch, 7000028239
10 × $20.46 -
×
3M 71346, 675L, 1" X 120", 125u, Diamond Microfinishing Film Belts, 7010534823
1 × $97.89 -
×
Dynabrade 78584 1/4" Dia. x 1-1/2" W x 1/8" Center Hole, 80 Grit, 100/pack
100 × $0.58 -
×
Dynabrade 78601 3/8" Dia. x 2" W x 1/8" Center Hole, 180 Grit, 100/pack
100 × $0.78
-
×
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
250 × $4.14 -
×
Dynabrade 95848 Dynabrade Gear Oil
1 × $12.98 -
×
3M 66261, Wind Protection Tape Edge Sealer W2600, 50 ml (1.7 fluid ounce), 7000049496, 12/Case
12 × $69.98 -
×
3M™ 07011, Supplied Air Respirator Hose W-9435-50/07011(AAD), 7000005373, 1 EA/Case
1 × $274.26 -
×
3M™ 17379, Versaflo™ Length Adjusting Breathing Tube BT-30, 7100009685, 1 EA/Case
1 × $80.58 -
×
Dynabrade 40320 Dynafile II Abrasive Belt Tool
1 × $722.00 -
×
3M 67925, Cloth Belt 777F, P120 YF-weight, 1/2 in x 12 in, Fabri-lok, Single-flex, 7010363457, 200 per case
200 × $2.18
3M 09320, Regalite Floor Surfacing Rolls, 12 in x 50 yd, 752I, P80 Grit, 7010314927
$245.03
Factory Stock, 7-10 Day Leadtime
3M Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite mineral and tough paper backing.
3M Floor Surfacing Rolls are recommended for general drum sanding. They are especially good for removing gummy finishes. This abrasive cuts fast.
