-
×
ACS Diamond Cloth Belt, CX1250 3" X 90" 75U
2 × $171.30 -
×
3M 14593, Scotch-Brite Cut and Polish Disc, 3" x 1-1/4" x 1/4" A Medium, D5, 7000045941, Box of 10
10 × $16.71 -
×
Dynabrade 78600 3/8" Dia. x 2" W x 1/8" Center Hole, 120 Grit, 100/pack
100 × $59.00 -
×
3M 30025, Pressure Sensitive Spray Adhesive 72, Blue, 24 fl oz Can (Net Wt 17.3 oz), 7000046588, 12/Case
12 × $22.51 -
×
ACS Diamond Cloth Belt, CX1250 3" X 30" 125U
2 × $57.10
-
×
3M™ 72013, Adapter 529-04-50, 110-120 VAC, 7000131705, 1 EA/Case
1 × $129.94 -
×
Dynabrade 78586 1/4" Dia. x 1-1/2" W x 1/8" Center Hole, 180 Grit, 100/pack
100 × $0.58
-
×
3M 31959, 6450J, M125, 1" X 30", Type C, Pattern 18 Diamond Belts, 7100052712
1 × $0.00 -
×
3M 15058, Scotch Electrical Shielding Tape 24, 1 in x 100 ft (25 mm x 30,5 m), 7100005805
10 × $227.65 -
×
3M 15913, Scotch-Brite Roloc Disc High Strength, TR, 2 in X NH A Medium, 7000000710
200 × $1.72 -
×
Standard Abrasives 703654, A/O Square Pad, 2 in x 2 in x 1/2 in, 1/4-20, 80, 7100105433
100 × $5.24 -
×
3M 76975, Microfinishing PSA Film Disc 268L, 30 Mic, Type D, Green, 5 in x NH, Die 500X, 7000118196, 500 per case
500 × $1.15 -
×
3M 71347, 641WY, 3" X 30", 220 Mesh, Diamond Cloth Belts, 7010534831
1 × $137.54 -
×
3M™ 94275, Versaflo™ Gold Coated Tinted Over-Visor with UV/IR Protection M-967N, 70071696879, 1 EA/Case
1 × $192.76 -
×
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
200 × $1.74 -
×
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
240 × $8.38 -
×
3M 88903, PSA Cloth Disc 348D, 60 X-weight, 12 in x NH, Die 1200B, 7000118896
10 × $7.75
3M 09320, Regalite Floor Surfacing Rolls, 12 in x 50 yd, 752I, P80 Grit, 7010314927
$245.03
Factory Stock, 7-10 Day Leadtime
3M Floor Sanding Rolls offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional rolls. The rolls feature the familiar purple Regalite mineral and tough paper backing.
3M Floor Surfacing Rolls are recommended for general drum sanding. They are especially good for removing gummy finishes. This abrasive cuts fast.
