-
×
Dynabrade 78008 1/2" W x 12" L Very Fine Non-Woven DynaBrite Belts, 10/pack
10 × $5.03 -
×
Dynabrade 01794 Rubber Drive Wheel
2 × $299.83 -
×
Dynabrade 11078 Contact Wheel Ass'y, 5/8" Dia. x 3/8" W x 3/8" I.D., Crown Face, 70 Duro Rubber
1 × $36.60 -
×
Dynabrade 97012 Screw
1 × $1.50 -
×
Dynabrade 11005 Dynafile Belt Housing Guard
2 × $52.09 -
×
Dynabrade 58511 68 mm x 175 mm Dynabug II Orbital Sander, Non-Vacuum, .15 hp, 10,000 RPM, 3/32" Orbit
1 × $250.00 -
×
Dynabrade 59020 5" Dia. Non-Vacuum Dynorbital-Spirit Random Orbital Sander, 3/16" Orbit
1 × $213.00 -
×
Dynabrade 62347 Interface Ring
1 × $386.32 -
×
Dynabrade 43493 Diffuser, F.E., Ext Die Grinder
1 × $45.17
-
×
Dynabrade 95544 Gear Grease, 2.5oz. Tube
1 × $11.43 -
×
Dynabrade 11203 Contact Arm Ass'y, 5/8" Dia. x 3/8" W, Rubber Wheel, with 1/2" W Platen
1 × $73.63 -
×
Dynabrade 80087 Motorhead Ass'y- 110-120V-60 Hz
1 × $657.99
-
×
![Dynabrade 95800 [1-1/4" Thread - 1-1/4" Non-Thread], Non-Conductive Vacuum Hose Cuff (Includes 95895 Insert)](https://store.alloycoatingsupply.com/wp-content/uploads/2018/08/95800-300x300.jpg)
Dynabrade 95800 [1-1/4" Thread - 1-1/4" Non-Thread], Non-Conductive Vacuum Hose Cuff (Includes 95895 Insert)
1 × $10.80 -
×
Dynabrade 90368 3/4" W x 34" L 80 Grit A/O DynaCut Belt, 50/pack
50 × $2.55 -
×
Dynabrade 50947 - 8" (203 mm) Dia. Non-Vacuum Wet/Dry Sander Disc Pad, Hook-Face, Short Nap
1 × $42.98
Dynabrade 62845 Raptor Vac Dust Extraction Arm, w/ 13″ x 19″ Hood
$2,508.54
Raptor Vac® Dust Extraction Arm, with 13″ x 19″ Hood
Dynabrade 62845 Raptor Vac® Dust Extraction Arms For ATEX Approved Extraction of Combustible Dust Raptor Vac® Dust Extraction Arms are used with Division 1 Vacuums and are specially designed for workplaces generating large amounts of dust/fumes. These easy-to-use Arms afford the operator the ultimate in mobility and flexibility, along with high-suction capability in even the toughest areas!
For use with vacuum models:
61461, 61462, 61463, 61464
Accessory Specifications
Mfr. Part # 62845
Dynabrade 62845 Raptor Vac® Dust Extraction Arms For ATEX Approved Extraction of Combustible Dust Raptor Vac® Dust Extraction Arms are used with Division 1 Vacuums and are specially designed for workplaces generating large amounts of dust/fumes. These easy-to-use Arms afford the operator the ultimate in mobility and flexibility, along with high-suction capability in even the toughest areas!
For use with vacuum models:
61461, 61462, 61463, 61464
Related products
