-
×
Dynabrade 79969 5" Dia. x 60 Grit Non-Vacuum Hook-Face DynaCut Disc, 100/Box
1 × $52.54 -
×
Dynabrade 14062 Contact Wheel, 2" Dia. x 2" W x 1-1/8" I.D., Crown Face, 70 D Urethane
1 × $393.58 -
×
Dynabrade 79929 6" Dia. x 150 Grit Vacuum PSA DynaCut Disc, 100/Pack
1 × $49.02 -
×
Dynabrade 64002 SuperFinisher, 230 Volts (AC), 1 Phase, 50 Hz
1 × $14,467.64 -
×
Dynabrade 02029 Spindle
1 × $121.53 -
×
Dynabrade 97989 - 115 V, 1.5 hp 1 Phase Starter
1 × $418.42
-
×
Dynabrade 96777 O-Ring, AS-568-027
1 × $2.07
-
×
Dynabrade 96018 Tune-Up Kit for Orbital Sanders
1 × $241.69 -
×
Dynabrade 79854 3" 120 Grit Dynacut Extreme Orange Film Vac Hook Face Disc, 50 per box
1 × $35.37 -
×
Dynabrade 50307 4-1/2"- 5" Dia. Vertical Disc Sander, Rear Exhaust, 1.2 HP, 11,000 RPM, 5/8"-11 Thread
1 × $1,130.00 -
×
Dynabrade 58296 Housing for 56884
1 × $107.62
-
×
Dynabrade 40770 Housing Label Assembly, 40615, 220 V - 240 V
1 × $131.93
-
×
Dynabrade 60052 .1 hp Straight-Line Quick-Change Pencil Grinder, Rear Exhaust, 35,000 RPM, 3/32" Collet
1 × $1,025.00 -
×
Dynabrade 98062 End Plate
1 × $93.35
Insize 7341-8S, PIN GAGE HANDLE (with 1pc handle and 4 pairs of collecting bushes), .406-.465″, 6928640370632
$44.69
Wrench is needed to install pins.
Clamping bushes (.008-.281″) are made of brass, clamping bushes (.281-1.010″) are made of aluminum.
Related products
Measuring/ Inspection Instruments
$37.42
Measuring/ Inspection Instruments
$47.42
Measuring/ Inspection Instruments
Insize 4209-6, LONG HANDLE TELESCOPING GAGE, 3-1/2 ~ 6″, 6928640311581
$16.80
Measuring/ Inspection Instruments
$40.47