-
×
Dynabrade 64995 Rigid Caster
1 × $194.52 -
×
Dynabrade 96234 Motor Tune-Up Kit
1 × $246.75 -
×
Dynabrade 79857 3" 220 Grit Dynacut Extreme Orange Film Vac Hook Face Disc, 50 per box
1 × $35.37 -
×
Dynabrade 22090 2-3/4" x 5" Hand Sanding Block
1 × $54.43 -
×
Dynabrade 68100 Coolant Filtration System, 230 V (AC), 1 Phase, 60 Hz
1 × $4,051.00 -
×
Dynabrade 53234 7" Dia. Type 27 Vertical Depressed Center Wheel Grinder, 2 HP, 7,200 RPM, 5/8"-11 Spindle
1 × $1,559.00 -
×
Dynabrade 15318 Contact Wheel, 3/4" Dia. x 7/8" W x 3/8" I.D., Crown Face, 70 Duro Rubber
1 × $37.41
-
×
Dynabrade X51H 5" (127 mm) Dia. Non-Vacuum Dynorbital Extreme Random Orbital Sander, .3 HP, 12,000 RPM, 3/16" Orbit, Hook-Face
1 × $223.00 -
×
Dynabrade 95599 Hose Cuff, 1" Thread to 1" Non-Thread
1 × $51.69
-
×
Dynabrade 01791 Washer
1 × $2.07
-
×
Dynabrade 02113 Housing for Model 51214
1 × $109.36
-
×
Dynabrade 80462 Motor, 120V/60Hz
1 × $170.10
-
×
Dynabrade 61472 Raptor Vac Pneumatic Vacuum - Backpack Style, 1.5 Gallon
1 × $3,002.45 -
×
Dynabrade 57970 Air Control Ring
1 × $29.08 -
×
Dynabrade 95048 Hex Key Wrench, 1/8"
1 × $2.07
-
×
Dynabrade 01115 Adjustment Nut
1 × $72.91
Insize 7341-6S, PIN GAGE HANDLE (with 1pc handle and 6 pairs of collecting bushes), .281-.341″, 6928640360671
$47.42
Wrench is needed to install pins.
Clamping bushes (.008-.281″) are made of brass, clamping bushes (.281-1.010″) are made of aluminum.
Related products
Measuring/ Inspection Instruments
Insize 4209-3, LONG HANDLE TELESCOPING GAGE, 3/4 ~ 1-1/4″, 6928640311550
$14.53
Measuring/ Inspection Instruments
$33.91
Reflective Sheeting
3M 80299, Two-Handled Textured Surface Applicator TSA-4, Replacement Roller, 7000056164
$119.90