-
×
3M 49689, PSA Cloth Disc 348D, 60 X-weight, 10 in x NH, Die 1000C, 7010326501
10 × $5.76 -
×
3M 05783, Hookit Pad D/F, 8 in x 5 bolt hole, 7000119884
1 × $76.81 -
×
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
500 × $0.67 -
×
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
300 × $6.03 -
×
3M™ 07011, Supplied Air Respirator Hose W-9435-50/07011(AAD), 7000005373, 1 EA/Case
1 × $274.26 -
×
3M 71361, 641WY 1/4" X 24", 1200 Mesh Diamond Cloth Belt, 7010534916
18 × $9.52 -
×
3M 05027, Cloth Belt 384F, 240+ XF-weight, 1/2 in x 12 in, Fabri-lok, 7100141448, 200 per case
200 × $0.97 -
×
Dynabrade 15420 Dynafile III Abrasive Belt Tool
1 × $1,012.00 -
×
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
200 × $1.50 -
×
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091
500 × $0.75 -
×
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
500 × $0.67 -
×
3M 49938, Roloc Disc 361F, 80 YF-weight, TSM, 2 in, Die RS200PM, 7000119019
200 × $0.97 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,245.00 -
×
Insize 7341-3S, PIN GAGE HANDLE (with 1pc handle and 7 pairs of collecting bushes), .131-.180", 6928640370588
1 × $36.91
Insize 7341-7S, PIN GAGE HANDLE (with 1pc handle and 6 pairs of collecting bushes), .341-.406″, 6928640370625
$46.70
Wrench is needed to install pins.
Clamping bushes (.008-.281″) are made of brass, clamping bushes (.281-1.010″) are made of aluminum.
Related products
Measuring/ Inspection Instruments
$55.80
Measuring/ Inspection Instruments
$125.64
Reflective Sheeting
3M 80298, Two-Handled Textured Surface Applicator TSA-4, Large Area Roller, 1Ea/Case, 7000005261
$500.85
Measuring/ Inspection Instruments
$44.02
Measuring/ Inspection Instruments
Insize 4209-4, LONG HANDLE TELESCOPING GAGE, 1-1/4 ~ 2-1/8″, 6928640311567
$16.55