Sensitivity .00024in/ft (=0.001?)
V-groove on bottom for shafts (shafts diameter .63~2.76″)
With transverse vial
Supplied with adjusting wrench
Dynabrade 95677 1/4" Male Plug with 1/4" NPT Female Thread
3M 85492, Scotch Foil Tape 3311-10A, 2.0 in x 10 yd (50.8 mm x 9,1 m), 7010383663
Dynabrade 96101 Dynabrade Air Lube 10W/NR 24 Per Box
Insize 1120-1501, DIGITAL INSIDE GROOVE CALIPER, 1.38-6"/35-150mm, 6928640384790
Insize 7230, SCRIBER, 6928640320064
3M 19074, E-A-R UltraFit Probed Test Plugs 393-2001-50, 50 EA/Case, 7000002387
3M 65949, Yellow Neons Test Plugs 393-2014-50, Large 50/Case, 7000148551
Dynabrade 11475 Dynabelter Abrasive Belt Tool, Standard Duty
3M 27716, Cubitron II Roloc Durable Edge Disc 984F, 80+, YF-weight, TR, Maroon, 1-1/2 in, Die R150S, 7000045175, 200 per case
Standard Abrasives 709700, A/O Straight Cartridge Roll, 1/4 in x 1-1/2 in x 1/8 in 320, 7100080013
Insize 6144, ACCESSORY SET FOR DIGITAL CALIPERS, 6928640380839
3M 55053, Cubitron II Cloth Belt 984F, 80+ YF-weight, 1/2 in x 12 in, Fabri-lok, Single-flex, 7000119518, 200 per case
Dynabrade 95677 1/4" Male Plug with 1/4" NPT Female Thread
3M 85492, Scotch Foil Tape 3311-10A, 2.0 in x 10 yd (50.8 mm x 9,1 m), 7010383663
Dynabrade 96101 Dynabrade Air Lube 10W/NR 24 Per Box
Insize 1120-1501, DIGITAL INSIDE GROOVE CALIPER, 1.38-6"/35-150mm, 6928640384790
Insize 7230, SCRIBER, 6928640320064
3M 19074, E-A-R UltraFit Probed Test Plugs 393-2001-50, 50 EA/Case, 7000002387
3M 65949, Yellow Neons Test Plugs 393-2014-50, Large 50/Case, 7000148551
Dynabrade 11475 Dynabelter Abrasive Belt Tool, Standard Duty
3M 27716, Cubitron II Roloc Durable Edge Disc 984F, 80+, YF-weight, TR, Maroon, 1-1/2 in, Die R150S, 7000045175, 200 per case
Standard Abrasives 709700, A/O Straight Cartridge Roll, 1/4 in x 1-1/2 in x 1/8 in 320, 7100080013
Insize 6144, ACCESSORY SET FOR DIGITAL CALIPERS, 6928640380839
3M 55053, Cubitron II Cloth Belt 984F, 80+ YF-weight, 1/2 in x 12 in, Fabri-lok, Single-flex, 7000119518, 200 per case
Sensitivity .00024in/ft (=0.001?)
V-groove on bottom for shafts (shafts diameter .63~2.76″)
With transverse vial
Supplied with adjusting wrench
