-
×
3M 85492, Scotch Foil Tape 3311-10A, 2.0 in x 10 yd (50.8 mm x 9,1 m), 7010383663
24 × $4.02 -
×
3M 05011, Cloth Belt 384F, 120+ XF-weight, 3/4 in x 20-1/2 in, Fabri-lok, 7100141429, 200 per case
200 × $1.33 -
×
Insize 7332, SPINDLE LIFT KNOB, 6928640312649
1 × $4.64 -
×
3M 05048, Cloth Belt 384F, 80+ XF-weight, 1 in x 12 in, Fabri-lok, Full-flex, 7100141432, 200 per case
400 × $1.73 -
×
3M 26137, PPS Series 2.0 Adapter, Type S41, Trapezoidal Thread - QCC, 7100135947
1 × $27.52 -
×
3M 26140, PPS Series 2.0 Adapter, Type S45, 1/4 Female, 19 Thread BSP, 7100135336
4 × $27.52 -
×
3M 01328, PSA Cloth Disc 348D, P180 X-weight, 3 in x NH, Die 300V, 7000045068
200 × $1.05 -
×
Insize 6140, DEPTH BASE ATTACHMENT, suitable for calipers with beam width (w) .630", 6928640303579
2 × $24.84
-
×
3M 05182, Scotch-Brite Cut and Polish Wheel, CP-WL, 5A Fine, 6 in x 1/2 in x 1 in, 7100050403,Box of 4
1 × $103.88 -
×
3M 26022, PPS Series 2.0 Adapter, Type S12, 10 mm Male, 1.0 mm Thread, 7100135943
1 × $27.52 -
×
3M 26200, PPS Series 2.0 Lid, Standard/Large, 200 Micron Filter, 7100135626
1 × $44.31 -
×
Insize 6144, ACCESSORY SET FOR DIGITAL CALIPERS, 6928640380839
1 × $85.16
-
×
Insize 4807, ANGLE GAGE SET, 6928640319341
1 × $67.89
-
×
Standard Abrasives 530205, A/O Resin Fiber Disc, 7 in x 7/8 in 60, 7010310605
25 × $1.29 -
×
Standard Abrasives 710870, Cartridge Roll Mandrel, 1/8 in x 1/2 in x 1/4 in x 1-1/4 in x 2-1/4 in CM-7, 7000121794
5 × $5.36 -
×
3M 26016, PPS Series 2.0 Adapter, Type S9, 16 mm Male, 1.5 mm Thread, 7100135330
4 × $27.52 -
×
Dynabrade 77794 4-1/2" Dia. x 7/8" Center Hole, 80 Grit, Type 29, Ceramic DynaCut Flap Disc, 10/pack
10 × $6.34 -
×
Insize 6143, DEPTH STOP FOR CALIPERS, 6928640371301
1 × $18.91
-
×
Insize 3352-50A, HIGH PRECISION DIGITAL BLADE MICROMETERS/SNAP GAGE (with data interface), 25-50mm/1-2", .0002mm/.00001", 6940561982176
1 × $1,226.56
-
×
3M 41554, Hi-Strength 90 Cylinder Spray Adhesive, Clear, Large Cylinder (Net Wt 28.8 lb), 7000028603
1 × $593.86 -
×
Insize 1151-300, DIGITAL HEIGHT GAGE, 0-12"/0-300mm, 6928640302725
1 × $772.44
-
×
Insize 4808, WIRE GAGE, 0-36(.3249~.0050"), 6928640330155
1 × $34.30
-
×
Insize 1120-300A, DIGITAL INSIDE GROOVE CALIPER, 1.18-12"/30-300mm, 6928640302244
1 × $378.13
-
×
Insize 6300, MICROMETER STAND, 6928640307294
1 × $51.95
-
×
3M 15041, Scotch Electrical Shielding Tape 24, 1 in x 15 ft (25 mm x 4,6 m), 7000031348
10 × $38.32
Insize 3590-203E, DIGITAL V-ANVIL MICROMETER, .2-.8″/5-20mm, 3 flutes, 6928640356117
$664.06
Resolution .00005″/0.001mm.
Measure the diameter of parts or cutting tools with odd grooves, such as tapes, reamers and end mills.
IP65 dust/waterproof. Button function: on/off, set, inch/mm, ABS/INC.
Data output. LR44 battery, automatic power off.
Ratchet stop.
Carbide measuring faces.
Supplied with setting standards.
