Conformable Tape with a Strong Hold
3M™ General Purpose Masking Tape 203 was designed to provide instant adhesion to a variety of surfaces. Its moderate adhesion supplies adequate holding power and helps resist lifting or curling. In addition, General Purpose Masking Tape 203 is conformable, maintaining integrity and seal when formed around corners and uneven surfaces. The crepe paper backing resists slivering and tears off the roll easily. With good paint hold-out and bleed-through resistance, this masking tape is ideal for many applications and removes cleanly from most substrates for up to 24 hours and has a temperature resistance of up to 200°F (93°C).
Recommended Applications
- MRO/Construction Painting
- Woodworking
- Entry level painting
- Appliance sealing and wrapping applications
What is Masking Tape?
Masking tape was developed specifically to help protect surrounding surfaces from overspray, provide clean paint lines, and remove easily and cleanly when finished. Masking tapes from 3M adhere well, resist solvents or water from the paint, and are strong enough to hang plastic sheeting, yet remove cleanly without damaging the subsurface. The backing, typically crepe paper, can conform to curved and irregular surfaces. The tape hand tears for tool-free application.

Dynabrade 95842 Dynabrade Air Lube 10W/NR, 1 Pint
Dynabrade 64350 26" W x 36" L (660 mm W x 914 mm L) Metal Capture Downdraft Station, 230 V (AC)
Dynabrade 59380 Rotor/Vane Set
Dynabrade 92115 1/2" W x 12" L 220 Grit A/O DynaCut Belt, 50/pack
Dynabrade 94897 Re-usable Compression Fitting Ass'y (for 8mm Hose)
Dynabrade 11518 Rubber Drive Wheel
Dynabrade 53533 Cone or Plug Grinder (Triple Extension)
Dynabrade 11477 Dynabelter Abrasive Belt Tool, Heavy-Duty
Dynabrade 13310 Mini-Dynisher Finishing Tool Versatility Kit, .4 HP, Rear Exhaust, 3,200 RPM, 5/8" Arbor
Dynabrade 14000 Dynafile Abrasive Belt Tool
Dynabrade 01011 Vane Set (4pk)
Dynabrade 56205 5" Dia. Non-Vacuum Disc Pad, Vinyl-Face
Dynabrade 11476 Dynabelter Abrasive Belt Tool, Heavy-Duty
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
Dynabrade 18426 Vane Set (4pk)
Dynabrade 45203 Housing for Model 47200
Dynabrade 78049 1/2" W x 24" L Coarse NWN DynaBrite Belt, 10/pack
Dynabrade 45202 Sleeve for 48327, 30,000 RPM
Dynabrade 90425 1/4" W x 24" L 320 Grit A/O DynaCut Belt, 50/pack
Dynabrade 98580 Motor Tune-Up Kit for National Detroit Sander Models
3M 5680, Disc Pad Holder, 3M 915, 5 in x 1/8 in x 3/8 in 5/8-11 Internal, 7000120889
Dynabrade 90513 1" W x 30" L 220 Grit A/O DynaCut Belt, 50/pack
Dynabrade 78538 3/4"Dia. 2-Set, 3-48 Female Center Thread, 80 Grit, Dynacut A/O Overlap Slotted Disc, 100/pack
3M 16580, Accuspray ONE Spray Gun System with Standard PPS, 7100099202 