-
×
3M™ 07011, Supplied Air Respirator Hose W-9435-50/07011(AAD), 7000005373, 1 EA/Case
2 × $274.26 -
×
3M 19811, Nitrile High Performance Plastic Adhesive 1099, Tan, 1 Quart Can, 7000000797, 12/case
12 × $62.24 -
×
3M 13325, Disc Pad Face Plate, 4-1/2 in Medium Gray, 7000120513
10 × $17.77 -
×
3M™ 07012, Supplied Air Hose W-9435-100/07012(AAD), 100 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005375, 1 EA/Case
1 × $435.37 -
×
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
240 × $8.38 -
×
3M 29860, Sanding Screen, 120 grit, 12 in x 18 in, 7100160860
20 × $5.05 -
×
Norton 66254432925 Wheel, 3" X 1/2" X 1/4" Bear-Tex, Rapid Blend, Non-Woven 5 Density, A/O, M Grit, 20 Each
20 × $17.78 -
×
3M™ 07010, Supplied Air Respirator Hose W-9435-25/07010(AAD), 25 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005374, 1 EA/Case
1 × $175.93
-
×
3M 98944, 3M Hand Tape Applicator, Large Block, 1 per case, 7010313229
1 × $44.95 -
×
Dynabrade 82460 5" Dia. x 240 Grit A/O PSA Filmbac DynaCut Disc, 100/Box
100 × $1.05 -
×
Standard Abrasives 32985, Aluminum Oxide Overlap Disc, 714721, 60 Grit, 2 in x 8-32 x 2 Ply, 7100116380
100 × $1.67 -
×
ACS CX1250 Diamond Belt, 1/2" X 24" 9u
12 × $7.60 -
×
3M 71361, 641WY 1/4" X 24", 1200 Mesh Diamond Cloth Belt, 7010534916
18 × $9.52 -
×
Insize 4209-6, LONG HANDLE TELESCOPING GAGE, 3-1/2 ~ 6", 6928640311581
1 × $16.55
-
×
3M 76523, Cloth Belt 777F, 50 YF-weight, 2 in x 72 in, Film-lok, Single-flex, 7000118456, 50 per case
50 × $14.69
3M 69780, Polyester Film/Mat Composite Film Tape 55, 23-1/2 in x 72 yd, Log Roll, 7000006005
$843.49
Factory Stock, 7-10 Day Leadtime
3M 55 Composite Film Electrical Tape is polyester web reinforced polyester film coated with a rubber pressure sensitive adhesive. Edge tear and puncture resistant with excellent electrical properties, it is tough and conformable. It is .0055 inch thick and is best used for coil cover, lead pad and core, layer and crossover insulation.
This tape is especially well suited for use as a coil cover. For end turns, lead pad and core layer and crossover insulation
