-
×
Dynabrade 51300 .5 hp Straight-Line Die Grinder, Front Exhaust, 15,000 RPM, 1/4" Collet
1 × $453.00 -
×
Dynabrade 54369 .7 hp Right Angle Die Grinder, Rear Exhaust, 12,000 RPM, 1/4" Collet
1 × $1,024.00 -
×
Dynabrade 54387 .7 hp Right Angle Die Grinder, Rear Exhaust, 18,000 RPM, 1/4" Collet
1 × $1,024.00 -
×
Dynabrade 48345 .4 hp Straight-Line Die Grinder, Rear Exhaust, 30,000 RPM, 1/8" Collet
1 × $437.00 -
×
Dynabrade Nitro Series ECU4 - 4" Diameter Extension Right Angle Cut-Off Wheel Tool
1 × $349.00 -
×
Dynabrade 95162 Screw
1 × $2.07 -
×
Dynabrade 52662 1 hp Straight-Line Die Grinder, Rear Exhaust, 3,400 RPM, 1/4" Collet
1 × $891.00 -
×
Dynabrade 52716 Cone or Plug Wheel Grinder, 15,000 RPM, 3/8"-24 Male Thread Spindle
3 × $607.00 -
×
Dynabrade 51302 .5 hp Straight-Line Die Grinder, Front Exhaust, 20,000 RPM, 1/4" Collet
3 × $453.00 -
×
Dynabrade 52100 .5 hp Straight-Line Die Grinder, Rear Exhaust, 950 RPM, 1/4" Collet
1 × $963.00 -
×
Dynabrade 92245 - 4" (102 mm) Dia. x 3/4" (19 mm) W Bent Coarse Wire Wheel
1 × $47.09 -
×
Dynabrade 52863 .4 hp Straight-Line Pencil Grinder, Rear Exhaust, 25,000 RPM, 1/4" Collet
1 × $582.00 -
×
Dynabrade 48341 .4 hp Straight-Line Die Grinder, Rear Exhaust, 30,000 RPM, 1/8" Collet w/Overhose
1 × $590.00 -
×
Dynabrade 53812 .7 hp Straight-Line Die Grinder, Steel Housing, Rear Exhaust, 20,000 RPM, 1/4" Collet
1 × $542.00 -
×
Dynabrade 90544 1/2" W x 44" L 60 Grit Z/A DynaCut Belt, 50/pack
100 × $3.43 -
×
Standard Abrasives 727395, Buff and Blend Cross Buff HS, A/O Coarse, 2 in x 1/2 in x 2 Ply x 8-32, 7010299537
25 × $5.84 -
×
Dynabrade 95544 Gear Grease, 2.5oz. Tube
1 × $11.43 -
×
Dynabrade 52718 Cone or Plug Wheel Grinder, 20,000 RPM, 3/8"-24 Male Thread Spindle
1 × $607.00 -
×
Dynabrade 14360 Pneumatic Pipe Belt Finisher
1 × $1,679.00 -
×
Dynabrade 52720 Cone or Plug 6" (152 mm) Extension Wheel Grinder, 15,000 RPM, 3/8"-24 Male Thread Spindle
1 × $755.00 -
×
Dynabrade 63600 RaptorVac PowerHead Replacement for 61200
1 × $1,021.13
3M 63738, Contractor Grade Multi-Use Duct Tape 2979, Silver, 1.88 in x 60 yd, 7010335692
$8.33
Factory Stock, 7-10 Day Leadtime
Constructed of polyethylene film laminated to cloth with a rubber adhesive, this economical tape resists curling and tears off the roll cleanly for applications in MRO/construction. 3M™ Contractor Grade Multi-Use Duct Tape 2979 is economically priced to best provide a temporary solution for light duties.
A Tape with Versatility
Originally developed for heating, ventilating and air conditioning (HVAC) applications, duct tape is used today in a variety of maintenance, repair and construction settings. Due to its unique design, 3M™ Contractor Grade Multi-Use Duct Tape 2979 is a good choice for light indoor, everyday jobs where moisture resistance is a factor. The tape can also be used at temperatures as high as 200°F for up to 30 minutes.
3M™ Contractor Grade Multi-Use Duct Tape 2979 comes with a classic, silver-colored backing. Our sturdy cloth-reinforced tape can be torn from the roll and sticks instantly, providing a wide range of convenient solutions.
Recommended Applications
- Patching
- Light bundling
- Tabbing
- Taping/splicing insulation
- Capping pipe
- Securing conduit ends
- Marking
- Labeling
- Temporary repair
- Hanging polyethylene drapes
Built to Stick
3M’s family of rugged cloth and duct tapes adheres to most surfaces for applications ranging from bundling to moisture proofing, sealing to splicing, reinforcing to hanging poly drapes. Available in a variety of colors and strengths, they’re known best for their hand tearability, high tensile strength and conformability.
Related products
